Secure Mobile Access 12.4 Administration Guide

Technical Documentation>  Management>  User Management>  Integrating an SMA Appliance with a SonicWall Firewall>  Configuring an SMA Appliance to Send RADIUS Accounting Records to a Firewall
Table of Contents

Configuring an SMA Appliance to Send RADIUS Accounting Records to a Firewall

To configure an SMA appliance to send RADIUS accounting records to a firewall

  1. In the AMC, navigate to System Configuration > Authentication Servers.

  2. Under Other servers, click the Edit icon for RADIUS Accounting.

  3. Select the Enable RADIUS Accounting checkbox.

  4. In the Primary RADIUS server field, enter the IP address of the firewall that you configured in Integrating an SMA Appliance with a SonicWall Firewall.

    1. In the Accounting port field, enter the port number you want to use. If the port field is left blank, the default port (1813) is used. Port 1646 is also commonly used for RADIUS accounting.

  5. In the Secondary RADIUS server field, enter the IP address of the firewall that you configured in Integrating an SMA Appliance with a SonicWall Firewall.

    1. In the Accounting port field, enter the port number you want to use. If the port field is left blank, the default port (1813) is used. Port 1646 is also commonly used for RADIUS accounting.

  6. In the Shared secret field, enter the same Shared Secret you configured on the firewall in Integrating an SMA Appliance with a SonicWall Firewall.

  7. Click Save.