Secure Mobile Access 12.4 Administration Guide
Table of Contents
Configuring ICMP
Enabling ICMP (Internet Control Messaging Protocol) lets you use the ping command to test network connectivity on a IPv4 or IPv6 interface.
From 12.4.2 onwards in AMC/CMC you can select multiple interface option for ICMP for internal only or external only or both interfaces.
-
In the AMC, navigate to System Configuration > Network Settings.
-
In the Basic section, click the Edit.
The Basic Network Settings page displays.
-
In the ICMP section, select the Enable ICMP pings checkbox.
-
In Allow on these interface(s), select any of the following:
-
Internal only
-
External only
-
Both Interfaces
-
-
Click Save and apply pending changes.
The CMS supports only the internal interface. Use other values when using policy synchronization to push ICMP configuration to managed appliances.
