Secure Mobile Access 12.4 Administration Guide

Technical Documentation>  Authentication>  Network and Authentication Configuration>  Configuring Name Resolution>  Configuring Windows Network Name Resolution
Table of Contents

Configuring Windows Network Name Resolution

If you want to browse files on a Windows network using WorkPlace, you must specify a WINS (Windows Internet Name Service) server and a Windows domain name. WorkPlace uses this information to perform name resolution and build a list of resources for users to browse.

To configure Windows network name resolution

  1. In the AMC, navigate to System Configuration > Network Settings.

  2. In the Name Resolution area, click Edit.

    The Name Resolution page displays.

  3. In the Windows Networking area, enter:

    • The IP address of your primary and (if applicable) secondary WINS server.

    • Your Windows domain name using NetBIOS syntax (for example, mycompany).

      If you are not using a WINS server, do not enter a value in the Windows domain name field.

  4. Click Save.