Wireless Network Manager Administration Guide
- Wireless Network Manager
- Getting Started with Wireless Network Manager
- Overview
- Using Air Marshal
- Managing Your Network
- Managing Policies
- Policy Hierarchy
- Select an AP Policy
- Select a Switch Policy
- General
- System
- Spanning Tree Protocol
- Link Layer Discovery Protocol
- Voice VLAN
- Quality of Service (QoS)
- Internet Group Management Protocol (IGMP) Snooping
- Dynamic Host Configuration Protocol (DHCP) Snooping
- Dynamic Host Configuration Protocol (DHCP) Relay
- Loopback Detection
- Jumbo Frames
- Multicast Filtering
- 802.1X
- Static Route IPV4
- DoS
- Radius Server
- Mirror Settings
- Address Resolution Protocol
- Static MAC Address Table
- SNMP
- Ports
- Port Policy
- Link Aggregation
- VLAN
- Select an SSID
- Select a Security Policy
- AP Policies
- Using Tags to Manage Access Points and SSIDs
- QoS Policies
- Wi-Fi Multimeda (WMM) Profiles
- Managing Switch Policies
- Managing Switch Port Policies
- Security Policies
- Managing SNMP Policies
- Managing Switch SNMP Policies
- Policy Hierarchy
- Objects
- Admin
- SonicWall Support
Using the Wireless Network Manager Interface
The first screen that appears when you launch Wireless Network Manager is the main screen seen below. It is from this screen that most of the activities and options start in Wireless Network Manager. The Wireless Network Manager user interface has a main navigation pane down the left side. It is from this pane that the user makes choices for navigating through the various Wireless Network Manager tools, features, and displays. The small arrow at the top middle of the screen sends you back to the Capture Security Center. Many of the secondary screens have an icon on the upper right border of the screen that, when clicked, sends you back to the main screen for that navigation pane item.
Clicking an option on the left navigation pane can sometimes open other choices. The principal headings on the navigation pane are:
- Overview
- Air Marshal
- Network
- Policies
- Objects
- Admin (which includes Reports, Users, Settings, and Certificates)
- Tools (which includes WiFi Planner)
Click on a heading, some of these areas can be expanded or collapsed to show any additional sections or just the main headings.
The Dashboard, shown here, is the screen that is active when you sign in. On the screen below, all of the topics on the navigation pane are expanded to show the full range of choices. The small orange circle to the right of the navigation pane indicates which choice is currently active on the screen. This marker carries through the various screens resulting from steps started on the main screen. Other choices also appear from time to time within the various screens. By hovering over one of your locations, for example, you can bring up information about it. On some screens, hovering over a row brings up options to be applied to that row.
The topics available in this guide explains each of the choices on the navigation pane, describing the selections that are available, and the screens and features that appear with each selection. This will help you configure and use Wireless Network Manager.
Was This Article Helpful?
Help us to improve our support portal