Wireless Network Manager Administration Guide
- Wireless Network Manager
- Getting Started with Wireless Network Manager
- Overview
- Using Air Marshal
- Managing Your Network
- Managing Policies
- Policy Hierarchy
- Select an AP Policy
- Select a Switch Policy
- General
- System
- Spanning Tree Protocol
- Link Layer Discovery Protocol
- Voice VLAN
- Quality of Service (QoS)
- Internet Group Management Protocol (IGMP) Snooping
- Dynamic Host Configuration Protocol (DHCP) Snooping
- Dynamic Host Configuration Protocol (DHCP) Relay
- Loopback Detection
- Jumbo Frames
- Multicast Filtering
- 802.1X
- Static Route IPV4
- DoS
- Radius Server
- Mirror Settings
- Address Resolution Protocol
- Static MAC Address Table
- SNMP
- Ports
- Link Aggregation
- VLAN
- Select an SSID
- Select a Security Policy
- AP Policies
- Using Tags to Manage Access Points and SSIDs
- QoS Policies
- Wi-Fi Multimeda (WMM) Profiles
- Managing Switch Policies
- Managing SNMP Policies
- Managing Switch SNMP Policies
- Policy Hierarchy
- Security
- Admin
- SonicWall Support
Port Settings
Wireless Network Manager provides a way for the user to enable or disable the LAN switch port. By default, the switch ports are down. To access this feature, edit the chosen device on this screen.
This feature is only available for the SonicWave 224w.
Wireless Network Manager provides Failover and Load Balancing support with 4G/LTE USB modems in SonicWave under cloud management.
By clicking on Config/Edit in the device row), then clicking on the General tab, you can edit a device on the Config SonicWave screen.
The access point must be a model with a USB port.
The WAN load balance mode selections appear when the switch is in NAT mode.
When applied, these indicators are displayed:
The Clients page displays status information for the Client Devices, as seen below. At the top, there is a time line that can be slid from left to right to show:
- Last Day
- Last Week
- Last 30 Days.
It also displays the operating system used by each one of the Client Devices.
The bottom panel has columns that give more information about each device.
Was This Article Helpful?
Help us to improve our support portal