Wireless Network Manager Administration Guide

Managing Policies > Policy Hierarchy > Select a Switch Policy > System > Static MAC Address Table
Table of Contents

Static MAC Address Table

The address table lists the destination MAC address, the associated VLAN ID, and port number associated with the address. When you specify a Static MAC address, you are set the MAC address to a VLAN and a port; thus it makes an entry into its forwarding table. These entries are then used to forward packets through the Switch. Static MAC addresses along with the Switch’s port security allow only devices in the MAC address table on a port to access the Switch.

To activate Static MAC Address Table

  1. Navigate to Policies > Policy Hierarchy > Switch Policy.
  2. Select the System tab and scroll down to the Static MAC Address Table section.
  3. Specify the MAC Aging Time. The range is 10-630 seconds.

  4. Specify the Mac Settings - Port, MAC Address, and VLAN in the respective fields.

    You can also search for a MAC Address, Port, Switch or Location using the Search field from here.