Wireless Network Manager Administration Guide
- Wireless Network Manager
- Getting Started with Wireless Network Manager
- Overview
- Using Air Marshal
- Managing Your Network
- Managing Policies
- Policy Hierarchy
- Select an AP Policy
- Select a Switch Policy
- General
- System
- Spanning Tree Protocol
- Link Layer Discovery Protocol
- Voice VLAN
- Quality of Service (QoS)
- Internet Group Management Protocol (IGMP) Snooping
- Dynamic Host Configuration Protocol (DHCP) Snooping
- Dynamic Host Configuration Protocol (DHCP) Relay
- Loopback Detection
- Jumbo Frames
- Multicast Filtering
- 802.1X
- Static Route IPV4
- DoS
- Radius Server
- Mirror Settings
- Address Resolution Protocol
- Static MAC Address Table
- SNMP
- Ports
- Port Policy
- Link Aggregation
- VLAN
- Select an SSID
- Select a Security Policy
- AP Policies
- Using Tags to Manage Access Points and SSIDs
- QoS Policies
- Wi-Fi Multimeda (WMM) Profiles
- Managing Switch Policies
- Managing Switch Port Policies
- Security Policies
- Managing SNMP Policies
- Managing Switch SNMP Policies
- Policy Hierarchy
- Objects
- Admin
- SonicWall Support
Select an SSID
The SSIDs are marked with the Wi-Fi symbol. They sometimes depend only on the Default Policy, and sometimes have other AP policies applied to them. They can also have Security Policies applied, such as CFS-1 and ACL-1.
Clicking on an SSID policy name in the middle pane of the Policy > Policy Hierarchy page brings up several options for configuring the SSIDs in your network.
Was This Article Helpful?
Help us to improve our support portal