• NetExtender 10.2 for Secure Mobile Access
• NetExtender Feature Overview
  • Document Scope
    • What is NetExtender
    • Benefits of using NetExtender
    • NetExtender Concepts
      • Stand-Alone Client
      • Installing NetExtender through Microsoft Installer - Pre-filling the Server and Domain Fields
      • NetExtender support Network logon (PreLogon)
      • Multiple Ranges and Routes
      • IP Address User Segmentation
      • Client Routes
      • External Authentication Methods
      • Point to Point Server IP Address
      • Tunnel All Mode
      • Proxy Configuration
      • About SMA Connect Agent
      • Supported Operating Systems for Connect Agent
    • Supported Platforms
      • NetExtender Client Versions
      • Supported Clients
      • Supported SonicWall Appliances
    • Feature Support in NetExtender
• Configuring NetExtender
  • User Prerequisites
  • User Configuration Tasks
    • Installing NetExtender on Windows
    • Enabling Network Logon (PreLogon) feature on NetExtender
    • Launching NetExtender Directly from Computer
      • Installing NetExtender with Microsoft Installer
    • Configuring NetExtender Properties
      • Configuring Connection Profile Settings
      • Configuring Settings
      • Connection Scripts Settings
      • Configuring Proxy Settings
      • Configuring Log Settings
      • Configuring Acceleration Settings
      • Configuring Packet Capture Settings
      • Configuring Languages Settings
      • Configuring Protocol
    • Installing NetExtender on Linux
    • Using NetExtender on Linux
• Using NetExtender
  • Viewing the NetExtender Log
  • Disconnecting NetExtender
  • Upgrading NetExtender
  • Changing Passwords
  • Authentication Methods
  • Uninstalling NetExtender
  • Verifying NetExtender operation from the System Tray
  • Using the NetExtender Command Line Interface
• NetExtender Troubleshooting
• SonicWall Support
  • About This Document

Tunnel All Mode

Tunnel All mode routes all traffic to and from the remote user over the Secure Mobile Access NetExtender tunnel including traffic to the remote users local network. This accomplished by adding the following routes to all remote clients’ route table.

NetExtender also adds routes for the local networks of all connected Network Connections. These routes are configured with higher metrics than any existing routes to force traffic destined for the local network over the Secure Mobile Access tunnel instead. For example, if a remote user is has the IP address 10.0.67.64 on the 10.0.*.* network, the route 10.0.0.0/255.255.0.0 is added to route traffic through the Secure Mobile Access tunnel.

Tunnel All mode is configured at the global, group, and user levels.