• NetExtender for Secure Mobile Access 10.2
• NetExtender Overview
  • What is NetExtender
  • NetExtender Concepts
    • Stand-Alone Client
    • NetExtender Supports Network logon (PreLogon)
    • NetExtender Supports Always On VPN (AOV)
    • Multiple Ranges and Routes
    • IP Address User Segmentation
    • Client Routes
    • Tunnel All Mode
    • Proxy Configuration
  • Supported Platforms
    • NetExtender Client Versions
    • Supported Clients
    • Supported SonicWall Appliances
  • What's New in NetExtender
  • Feature Support in NetExtender
  • Deprecated Feature
• Configuring NetExtender for Windows Client
  • Prerequisites
  • Support Enhancement
  • Installing NetExtender on Windows
  • Enabling Network Logon (PreLogon) Feature on NetExtender
  • Enabling Always-On VPN Connection
  • Installing NetExtender through Microsoft Installer
  • Auto-Run NetExtender
• Configuring NetExtender for Linux Client
  • Prerequisites
  • Installing NetExtender on Linux
• Using NetExtender
  • Adding Connection Profile Management
  • Editing Connection Profile Management
  • Connect with Connection Profile
  • Connect with Specific Protocol
  • Multiple Factor Authentication
    • TOTP Authentication
    • Client Certificate Authentication
    • Smart Card Authentication
    • DUO Security Authentication Support for NetExtender
      • DUO Security Authentication with NetExtender Windows
      • DUO Security Authentication with NetExtender Linux
  • Configuring NetExtender Properties
    • NetExtender Properties for Windows Client
      • Configuring Settings
      • Configuring Connection Settings
      • Configuring Connection Script
      • Configuring Proxy
      • Configuring Packet Capture
    • NetExtender Properties for Linux Client
      • Configuring Proxy
      • Configuring Certificate Settings
      • Configuring Settings
  • Viewing the NetExtender Log
  • Disconnecting NetExtender
  • Upgrading NetExtender
  • Uninstalling NetExtender
• Using the NetExtender Command Line Interface
  • Launching the NetExtender CLI for Windows
  • Launching the NetExtender CLI for Linux
• NetExtender Troubleshooting
• NetExtender FAQ
• Use Case
  • Adding Connection Profile
  • Editing Connection Profile
  • OTP Authentication
  • Certificate Authentication
  • Authentication with Smart Card
• SonicWall Support
  • About This Document

Smart Card Authentication

The NetExtender provides certificate authentication for Windows and Linux clients.

Prerequisites

• The Administrator should add the CA domain.

• The user should insert the smart card into the computer.

• The user should add a connection to this CA domain.

• The user should input a PIN when connecting to the server.

• The user should able to connect using this connection.

To enable the OTP authentication on NetExtender

1. On the SMA 100 appliance, navigate to System > Certificate. the Administrator should add the certificate CA under the Additional CA certificates section and restart SMA appliance.

   

2. On the SMA 100 appliance, navigate to Portals > Domains. the Administrator should add a CA domain and select the specific CA certificate.

   

3. The user should install the required client certificate signed by the specific CA.

4. The user should create a connection to this domain and click Save.

   

5. The user should input a smart card PIN to connect to this domain.

   

6. The user can connect with this connection.