SonicOS 7.0 High Availability Administration Guide
- SonicOS 7.0
- High Availability
- High Availability Status
- Configuring High Availability
- Configuring High Availability in the Cloud Platform
- Set up an Active/Standby High Availability Configuration Using Azure
- Install the Custom Template
- Enable Identity of Both Virtual Machines (HA1 and HA2)
- Role Assignment
- Check the Networking Tab
- Configuring Active NSv Firewall Using the Associated Public IP
- Configuring Standby NSv Firewall Using the Associated Public IP
- Enable the L3 Mode
- Configuring Active NSv Firewall Using the Floating Public IP
- Configuring HA to Active/Standby with L3 HA link
- Adding Additional Floating Public IP
- Set up an Active/Standby High Availability Configuration Using Azure
- Fine Tuning High Availability
- Monitoring High Availability
- Azure Use Cases
- SonicWall Support
Use Case 3: Configure DNAT on Azure HA Firewall
Configure a DNAT to remap the traffic of an interface IP (192.168.1.254, aka floating IP) accessing the firewall from the Internet to the traffic of a particular machine (192.168.2.200) in the LAN.
Floating IP always on active firewall
After HA failover
Was This Article Helpful?
Help us to improve our support portal