• High Availability
  • About High Availability
    • High Availability Terminology
    • High Availability Modes
    • High Availability Encryption
    • Crash Detection
    • Virtual MAC Address
    • Dynamic WAN Interfaces with PPPoE HA
    • Stateful Synchronization with DHCP
    • Stateful Synchronization with DNS Proxy
    • About HA Monitoring
  • Understanding High Availability
  • Understanding SonicWall High Availability Operation Modes
  • About Active/Standby HA
    • Benefits of Active/Standby HA
    • Working of Active/Standby HA
  • About Stateful Synchronization
    • Benefits of Stateful Synchronization
    • How Does Stateful Synchronization Work?
    • Example of Stateful Synchronization
  • Active/Standby Prerequisites
    • Supported Platforms and Licensing for HA
    • Physically Connecting Your Security Appliances
    • Connecting the Active/Active DPI Interfaces for Active/Active DPI
  • Maintenance
    • Removing an HA Association
    • Replacing a SonicWall Security Appliance
      • Replacing an HA Primary Unit
      • Replacing an HA Secondary Unit
• High Availability Status
  • Active/Standby High Availability Status
    • High Availability Status
    • High Availability Config
    • High Availability Licenses
• Configuring High Availability
  • Configuration of HA Active/Standby
  • Configuring Active/Standby High Availability Settings
  • Configuring HA with Dynamic WAN Interfaces
  • Configuring Network DHCP and Interface Settings
    • Disabling the SonicOS DHCP Server
    • Configuring Virtual IP Addresses
    • Configuring Redundant Ports
• Fine Tuning High Availability
  • Advanced Settings
  • Configuring Advanced High Availability Settings
• Monitoring High Availability
  • Configuring Active/Standby High Availability Monitoring
  • IPv6 High Availability Monitoring
  • IPv6 HA Monitoring Considerations
• Failure Monitoring
• SonicWall Support
  • About This Document

Benefits of Active/Standby HA

• Increased network reliability - In a High Availability configuration, the Secondary Security Appliance assumes all network responsibilities when the Primary unit fails, ensuring a reliable connection between the protected network and the Internet.
• Cost-effectiveness - is a cost-effective option for deployments that provide high availability by using redundant Security Appliances. You do not need to purchase a second set of licenses for the Secondary unit in a High Availability Pair.
• Virtual MAC for reduced convergence time after failover - The Virtual MAC address setting allows the HA Pair to share the same MAC address, which dramatically reduces convergence time following a failover. Convergence time is the amount of time it takes for the devices in a network to adapt their routing tables to the changes introduced by high availability. By default, the Virtual MAC address is provided by the SonicWall firmware and is different from the physical MAC address of either the Primary or Secondary Security Appliances.