SonicOS 7.0 High Availability Administration Guide
- SonicOS 7.0
- High Availability
- High Availability Status
- Configuring High Availability
- Configuring High Availability in the Cloud Platform
- Set up an Active/Standby High Availability Configuration Using Azure
- Install the Custom Template
- Enable Identity of Both Virtual Machines (HA1 and HA2)
- Role Assignment
- Check the Networking Tab
- Configuring Active NSv Firewall Using the Associated Public IP
- Configuring Standby NSv Firewall Using the Associated Public IP
- Enable the L3 Mode
- Configuring Active NSv Firewall Using the Floating Public IP
- Configuring HA to Active/Standby with L3 HA link
- Adding Additional Floating Public IP
- Set up an Active/Standby High Availability Configuration Using Azure
- Fine Tuning High Availability
- Monitoring High Availability
- Azure Use Cases
- SonicWall Support
Check the Networking Tab
For the next step, we are going to check the Networking tab.
- Access All Services > Virtual machine page is on the left panel.
-
Search for the Primary VM (HA1) you created during deployment.
-
On the left menu, access the Networking tab.
-
Select ha-HA1-Interface-X1 > Network Interface ha-HA1-Interface-X1 > IP Configurations.
You will note that the template automatically configures an additional Secondary Interface, which acts as a virtual IP address. Virtual IP address should be for both the WAN and LAN Interfaces. Therefore, these IPs will be necessary for the next part of the configuration.
Repeat the previous steps to access HA1-interface-X0 and check the Secondary Interface.
Now you've check that the Secondary Interface IP address is provided on both X1 and X0 interfaces, you will set those IPs on the Active NSv Firewall as shown in the next steps.
For the first login, it’s going to be necessary to Register the appliance.
Was This Article Helpful?
Help us to improve our support portal