Secure Mobile Access 100 10.2 NetExtender Feature Guide
- NetExtender 10.2 for Secure Mobile Access
- NetExtender Feature Overview
- Document Scope
- What is NetExtender
- Benefits of using NetExtender
- NetExtender Concepts
- Stand-Alone Client
- Installing NetExtender through Microsoft Installer - Pre-filling the Server and Domain Fields
- NetExtender support Network logon (PreLogon)
- Multiple Ranges and Routes
- IP Address User Segmentation
- Client Routes
- External Authentication Methods
- Point to Point Server IP Address
- Tunnel All Mode
- Proxy Configuration
- About SMA Connect Agent
- Supported Operating Systems for Connect Agent
- Supported Platforms
- Feature Support in NetExtender
- Document Scope
- Configuring NetExtender
- Using NetExtender
- NetExtender Troubleshooting
- SonicWall Support
Using the NetExtender Command Line Interface
The NetExtender command line interface is only available on Windows platforms.
To launch the NetExtender CLI
-
Launch the Windows Command Prompt by going to the Start > Run, enter
cmd
, and click OK. -
Change directory to where NetExtender is installed. Type
cd Program Files\SonicWall\SSL-VPN\NetExtender
.The specific command directory could be different on your computer. Use Windows Explorer to find the directory path where NetExtender is located.
NetExtender CLI commands and options Command Option Description NECLI addprofile Creates a NetExtender profile -s server The IP address or hostname of the SMA server -u user-name The username for the account. -p password The password for the account. -d domain-name The domain to connect to. NECLI connect Initiates a NetExtender session. -s server The IP address or hostname of the SMA server. -u user-name The username for the account. -p password The password for the account. -d domain-name The domain to connect to. - clientcertificatethumb thumb The SSL Client Certificate thumbprint value. - clientcertificatename name The SSL Client Certificate name. NECLI deleteprofile Deletes a saved NetExtender profile. -s server The IP address or hostname of the SMA server. -u user-name The username for the account. -d domain-name The domain to connect to. NECLI disconnect Disconnects timeout (Optional) Timeout duration, after which the session is disconnected. NECLI displayprofile Displays all NetExtender profiles. -s server (Optional) Displays only the profiles that are saved for the specified server -u user-name (Optional) Displays only the profiles that are saved for the specified user name. -d domain-name (Optional) Displays only the profiles that are saved for the specified domain name. NECLI queryproxy Checks the connect to the proxy server. NECLI reconnect Attempts to reconnect to the server. NECLI showstatus Displays the status of the current NetExtender session. NECLI setproxy Configures proxy settings for NetExtender -t [0 |1 | 2 | 3] There are three options for setting proxy settings:
0 - Disable proxy.
1 - Automatically detects proxy settings. The proxy server must support Web Proxy Auto Discovery Protocol (WPAD).
2 - Uses a proxy configuration script.
3 - Manually configure the proxy server
-s proxy address The address of the proxy script or proxy server -o port The port number. -u user name The user name for the proxy server. -p password The password name for the proxy server. -b bypass-proxy Bypasses the previously configured proxy settings. -save Saves the proxy settings. NECLI viewlog Displays the NetExtender log.
Was This Article Helpful?
Help us to improve our support portal