• NetExtender 10.2 for Secure Mobile Access
• NetExtender Feature Overview
  • Document Scope
    • What is NetExtender
    • Benefits of using NetExtender
    • NetExtender Concepts
      • Stand-Alone Client
      • Installing NetExtender through Microsoft Installer - Pre-filling the Server and Domain Fields
      • NetExtender support Network logon (PreLogon)
      • Multiple Ranges and Routes
      • IP Address User Segmentation
      • Client Routes
      • External Authentication Methods
      • Point to Point Server IP Address
      • Tunnel All Mode
      • Proxy Configuration
      • About SMA Connect Agent
      • Supported Operating Systems for Connect Agent
    • Supported Platforms
      • NetExtender Client Versions
      • Supported Clients
      • Supported SonicWall Appliances
    • Feature Support in NetExtender
• Configuring NetExtender
  • User Prerequisites
  • User Configuration Tasks
    • Installing NetExtender on Windows
    • Enabling Network Logon (PreLogon) feature on NetExtender
    • Launching NetExtender Directly from Computer
      • Installing NetExtender with Microsoft Installer
    • Configuring NetExtender Properties
      • Configuring Connection Profile Settings
      • Configuring Settings
      • Connection Scripts Settings
      • Configuring Proxy Settings
      • Configuring Log Settings
      • Configuring Acceleration Settings
      • Configuring Packet Capture Settings
      • Configuring Languages Settings
      • Configuring Protocol
    • Installing NetExtender on Linux
    • Using NetExtender on Linux
• Using NetExtender
  • Viewing the NetExtender Log
  • Disconnecting NetExtender
  • Upgrading NetExtender
  • Changing Passwords
  • Authentication Methods
  • Uninstalling NetExtender
  • Verifying NetExtender operation from the System Tray
  • Using the NetExtender Command Line Interface
• NetExtender Troubleshooting
• SonicWall Support
  • About This Document

Configuring Packet Capture Settings

The Packet Capture tab allows you to enable and disable packet capture and data compression on NetExtender. You must have Administrator privileges to change packet capture settings.

To manage the Packet Capture settings

1. Click to view the NetExtender Properties window and then click Packet Capture.

   

2. To enable packet capture, select Enable NetExtender packet capture.

3. Select Clear the capture when NetExtender exits to clear all captured packet data when NetExtender exits.

4. Select Enable capture cache to clear all captured packet data when NetExtender exits.

5. Select Enable data compression to enable data compression of captured packets.

6. Select Attempt to disable data compression during packet capture.if packet capture is enabled when NetExtender connects and you want to disable data compression immediately.

7. Click OK to save the changes.