• NetExtender 10.2 for Secure Mobile Access
• NetExtender Feature Overview
  • Document Scope
    • What is NetExtender
    • Benefits of using NetExtender
    • NetExtender Concepts
      • Stand-Alone Client
      • Installing NetExtender through Microsoft Installer - Pre-filling the Server and Domain Fields
      • NetExtender support Network logon (PreLogon)
      • Multiple Ranges and Routes
      • IP Address User Segmentation
      • Client Routes
      • External Authentication Methods
      • Point to Point Server IP Address
      • Tunnel All Mode
      • Proxy Configuration
      • About SMA Connect Agent
      • Supported Operating Systems for Connect Agent
    • Supported Platforms
      • NetExtender Client Versions
      • Supported Clients
      • Supported SonicWall Appliances
    • Feature Support in NetExtender
• Configuring NetExtender
  • User Prerequisites
  • User Configuration Tasks
    • Installing NetExtender on Windows
    • Enabling Network Logon (PreLogon) feature on NetExtender
    • Launching NetExtender Directly from Computer
      • Installing NetExtender with Microsoft Installer
    • Configuring NetExtender Properties
      • Configuring Connection Profile Settings
      • Configuring Settings
      • Connection Scripts Settings
      • Configuring Proxy Settings
      • Configuring Log Settings
      • Configuring Acceleration Settings
      • Configuring Packet Capture Settings
      • Configuring Languages Settings
      • Configuring Protocol
    • Installing NetExtender on Linux
    • Using NetExtender on Linux
• Using NetExtender
  • Viewing the NetExtender Log
  • Disconnecting NetExtender
  • Upgrading NetExtender
  • Changing Passwords
  • Authentication Methods
  • Uninstalling NetExtender
  • Verifying NetExtender operation from the System Tray
  • Using the NetExtender Command Line Interface
• NetExtender Troubleshooting
• SonicWall Support
  • About This Document

Configuring Acceleration Settings

The Acceleration Settings tab allows you to accelerate IP and port to ensure high performance.

Acceleration is supported only on Gen6.

To manage the Acceleration settings

1. Click to view the NetExtender Properties window and then click Acceleration.

   

2. Select Enable Acceleration to enable the IP Address acceleration and enter the IP address. You can include or exclude the IP Address as required.

3. Specify the Port number and select Check for upgrades automatically to enable upgrades. You can include or exclude the Ports as required.

4. Optionally, you can select the Enable WXAC Debug log checkbox, if required.

5. Click OK to save your changes.