• SonicOS NSv 7
• Introducing the NSv Series
  • Feature Support Information
  • Node Counts Per Platform
  • Installation File / Supported Platforms
  • Hardware Compatibility
  • Support for SR-IOV
  • Support for vMotion
  • Support for One-Arm Mode
  • Support for Tap Mode
  • Product Matrix and Requirements
  • Backup and Recovery Information
  • Best Practices and Recommendations
  • High Availability Configurations
  • Exporting and Importing Firewall Configurations
  • Upgrading from SonicOS 6.5
  • Upgrading to a Higher Capacity NSv Model
  • Creating a MySonicWall Account
• Installing SonicOS on the NSv Series
  • Obtaining the OVA from MySonicWall
  • Installing the NSv Virtual Machine
  • Viewing and Editing Virtual Machine Settings
  • Troubleshooting Installation Configuration
    • Insufficient Memory Assignment
    • Incompatible CPU
    • Incorrect CPU Configuration
    • Insufficient Resources at Time of Configuration
    • Incorrect Network Adapter Configuration
    • Incorrect Number of Network Adapters
    • Insufficient Memory When Jumbo Frames Enabled
• Licensing and Registering Your NSv
  • Registering the NSv Virtual Machine with SonicOS
• SonicOS Management
  • Managing SonicOS on the NSv Series
  • Using System Diagnostics
• Using the Virtual Console and SafeMode
  • Using the ESXi Remote Console to Configure the WAN or LAN Interfaces
  • Navigating the NSv Management Console
    • System Info
    • Management Network or Network Interfaces
    • Test Management Network
    • Diagnostics
    • NTP Server
    • Lockdown Mode
      • Temporary Lockdown Mode
    • System Update
    • Reboot | Shutdown
    • About
    • Logs
  • Configuring SR-IOV
  • Using SafeMode on the NSv
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Management Network in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
    • Installing a New SonicOS Version in SafeMode
    • Downloading Logs in SafeMode
• SonicWall Support
  • About This Document

Best Practices and Recommendations

• Configuration settings import is not supported from the SonicWall physical appliances to the NSv Series.
• SonicWall NSv supports the vmxnet3 VMware Network Adapter Type. Exactly eight virtual network interfaces (vNICs) are supported on each NSv platform. Adding and removing interfaces is supported, but the total must stay within the range of two to eight.
• To configure Virtual Interfaces in NSv, map the NSv parent interface for the virtual interface to a port group with the VLAN ID 4095 (Trunk Port). NSv treats a port group with VLAN 4095 as a Trunk Port.
• SonicWall recommends that you do not use the NSv snapshot functionality. For more information, see https://kb.vmware.com/s/article/1025279.