• SonicOS NSv 7
• Introducing the NSv Series
  • Feature Support Information
  • Node Counts Per Platform
  • Installation File / Supported Platforms
  • Hardware Compatibility
  • Support for SR-IOV
  • Support for vMotion
  • Support for One-Arm Mode
  • Support for Tap Mode
  • Product Matrix and Requirements
  • Backup and Recovery Information
  • Best Practices and Recommendations
  • High Availability Configurations
  • Exporting and Importing Firewall Configurations
  • Upgrading from SonicOS 6.5
  • Upgrading to a Higher Capacity NSv Model
  • Creating a MySonicWall Account
• Installing SonicOS on the NSv Series
  • Obtaining the OVA from MySonicWall
  • Installing the NSv Virtual Machine
  • Viewing and Editing Virtual Machine Settings
  • Troubleshooting Installation Configuration
    • Insufficient Memory Assignment
    • Incompatible CPU
    • Incorrect CPU Configuration
    • Insufficient Resources at Time of Configuration
    • Incorrect Network Adapter Configuration
    • Incorrect Number of Network Adapters
    • Insufficient Memory When Jumbo Frames Enabled
• Licensing and Registering Your NSv
  • Registering the NSv Virtual Machine with SonicOS
• SonicOS Management
  • Managing SonicOS on the NSv Series
  • Using System Diagnostics
• Using the Virtual Console and SafeMode
  • Using the ESXi Remote Console to Configure the WAN or LAN Interfaces
  • Navigating the NSv Management Console
    • System Info
    • Management Network or Network Interfaces
    • Test Management Network
    • Diagnostics
    • NTP Server
    • Lockdown Mode
      • Temporary Lockdown Mode
    • System Update
    • Reboot | Shutdown
    • About
    • Logs
  • Configuring SR-IOV
  • Using SafeMode on the NSv
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Management Network in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
    • Installing a New SonicOS Version in SafeMode
    • Downloading Logs in SafeMode
• SonicWall Support
  • About This Document

Insufficient Memory When Jumbo Frames Enabled

The following error message appears on boot when there is insufficient memory and Jumbo frames have been enabled. The resolution is to power off the virtual machine and increase the memory.

Insufficient memory 5 GB. The minimum memory required is 10 GB for NSv model: “NSv 400” with the jumbo frame feature enabled

Power off the Network Security virtual machine and assign 10 GB of memory to this virtual machine