SonicOS 7 System

Technical Documentation > SonicOS 7 System > VLAN Translation > Creating and Managing VLAN Maps > Creating a VLAN Map > Creating the VLAN Mapping

Creating the VLAN Mapping

To create a VLAN mapping

  1. Navigate to NETWORK | System > VLAN Translation.
  2. Click +Add. The Add VLAN Translation dialog displays.
  3. Select the Wire Mode interface in the pair on which you expect to receive traffic from Ingress Interface.
  4. Set Ingress VLAN to the VLAN on which you expect to receive traffic for mapping.
  5. Select the Wire Mode interface in the pair on which you want to map traffic to the Egress Interface drop-down menu.
  6. Set Egress VLAN to the VLAN to which you expect to map traffic.
  7. To create a:

  • Unidirectional mapping, ensure Reverse Translation is not selected. For example, to map VLAN X on interface A to VLAN Y on interface B.

    This option is selected by default.

  • Bidirectional mapping, select Reverse Translation. For example, to map VLAN Y on interface B to VLAN X on interface A as well as map VLAN X on interface A to VLAN Y on interface B.
  1. Click Add. The Wiremode VLAN Translation table is updated.

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden