SonicOS 7 System

Technical Documentation>  Interfaces>  Interface Settings IPv4>  Layer 2 Bridged Mode>  Configuring Layer 2 Bridged Mode>  Configuring the Common Settings for L2 Bridged Mode Deployments>  Configuring SNMP Settings
Table of Contents

Configuring SNMP Settings

To configure SNMP settings

  1. Navigate to DEVICE | Settings > SNMP.
  2. Select Enable SNMP.
  3. Click Accept. Configure becomes active and the SNMP information is populated.
  4. Click Configure. The Configure SNMP dialog displays. For how to configure SNMP, see Setting Up SNMP Access.