• SonicOS 7.0
• About Device
  • Device AppFlow
• Flow Reporting
  • Statistics
    • External Flow Reporting Statistics
    • Internal AppFlow Reporting Statistics
    • Total IPFIX Statistics
  • Settings
    • Settings Configuration
    • Local Server Settings
    • Other Report Settings
  • AppFlow Agent
  • External Collector
  • SFR Mailing
    • SFR Email Settings
    • Scheduling SFR Reports by Email
      • Scheduling One-Time Delivery of the SFR
      • Scheduling Recurring Delivery of the SFR
      • Deleting Scheduled Reports
  • NetFlow Activation and Deployment Information
  • User Configuration Tasks
    • Configuring NetFlow Version 5
    • Configuring NetFlow Version 9
    • Configuring IPFIX (NetFlow Version 10)
    • Configuring IPFIX with Extensions
    • Configuring AppFlow Agent to Include Logs Through IPFIX
    • Configuring Netflow with Extensions with SonicWall Scrutinizer
  • NetFlow Tables
    • Static Tables
    • Dynamic Tables
    • Templates
      • NetFlow Version 5
      • NetFlow Version 9
      • IPFIX (NetFlow Version 10)
      • IPFIX with Extensions
• AppFlow Agent
  • Connecting to an AppFlow Agent
    • Basic Mode
    • Advanced Mode
• SonicWall Support
  • About This Document

Basic Mode

Establishing a connection is a two-step process:

1. Establish a connection to the AppFlow Agent.
2. Configure the AppFlow Agent on the Logs & Reporting | AppFlow Settings > Flow Reporting page in SonicOS.

For more detailed information about configuring an AppFlow Agent with GMS, refer to the latest SonicWall GMS or SonicWall Management Services administration documentation, available at Technical Documentation portal.

To establish a connection to an AppFlow Agent

1. Log in to the Instant AppFlow Agent.
2. Go to the NETWORK | System > Interfaces page.
3. Find and copy the Host IP address of the AppFlow Agent

On the SonicWall network security appliance

1. Navigate to the DEVICE | AppFlow > AppFlow Agent page.

2. For the AppFlow Agent Configuration Mode, Basic should be selected. (This is the default setting.)

   

3. In the AppFlow Agent Address field, either:

   • Paste the Host IP address you copied from the AppFlow Agent.
   • Select a predefined address object from the AddrObj drop-down menu. You can also create a new address object by choosing Create new address object.

4. In the Source IP to Use over VPN Tunnel field, specify the source IP address for the applicable VPN policy.

   If the AppFlow Agent is reachable through a VPN tunnel, then this field must be specified. You can choose an IP from the VPN policy.

5. In the Server Communication Timeout field, enter the number of seconds that the firewall waits to receive a response from the Flow Server. The range is 60 (default) to 120 seconds.
6. If you want to enable the firewall to send static flows to the Flow Server each time the firewall is rebooted, select the Auto-Synchronize Flow Server option. (This is selected by default.)
7. To test your connection to the AppFlow Agent, click Test Connectivity. The connectivity status is displayed.

8. If you want to manually send static data to the AppFlow Agent, click Synchronize Server. The synchronicity status is displayed.

   You must click Synchronize Server once, and once only, after connecting to and registering your SonicWall AppFlow Agent.

9. Click Accept.

• Connecting to an AppFlow Agent
• Advanced Mode