SonicOS 7.1 System

Port Configuration

Port Configuration

The Port Configuration table details more information about your PortShield interfaces:

Port Configuration Table
Name Port name associated with the PortShield interface, such as X0 or X15. Ports for any external switches are shown in the format ESs:n, where s is the switch ID and n is the port number, as appropriate.
PortShield Interface Color-coded graphic reflecting the PortShield interface’s assignment and to which PortShield group it belongs. This graphic is a smaller version of the larger graphic(s) on Port Graphics.
Link Settings

Link speed:

  • Auto Negotiate<![CDATA[ ]]>
  • 1000 Mbps – Full Duplex
  • 100 Mbps – Full Duplex
  • 100 Mbps – Half Duplex
  • 10 Mbps – Full Duplex
  • 10 Mbps – Half Duplex
Link Status

Displays either:

  • The current link speed, in green, for example, 1000 Mbps – Full Duplex.
  • No link.
Enabled

Enable icon that is:

  • Green if the interface is enabled.
  • Dimmed grey if the interface is disabled.
Comment Any comment entered when the interface was configured.
Configure

Contains one icon:

  • Edit – When clicked, displays the Edit Switch Port dialog. For more information about this dialog, see the procedure in Configuring PortShield Interfaces on NETWORK | System > PortShield Groups.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden