SonicOS 7.1 System
- SonicOS 7.1
- About SonicOS
- Interfaces
- About Interfaces
- Interface Settings IPv4
- Adding Virtual Interfaces
- Configuring Routed Mode
- Enabling Bandwidth Management on an Interface
- Configuring Interfaces in Transparent IP Mode (Splice L3 Subnet)
- Configuring Wireless Interfaces
- Configuring WAN Interfaces
- Configuring Tunnel Interfaces
- Configuring VPN Tunnel Interfaces
- Configuring Link Aggregation and Port Redundancy
- Configuring One Arm Mode
- Configuring an IPS Sniffer Mode Appliance
- Configuring Security Services (Unified Threat Management)
- Configuring Wire and Tap Mode
- Layer 2 Bridged Mode
- Key Features of SonicOS Layer 2 Bridged Mode
- Key Concepts to Configuring L2 Bridged Mode and Transparent Mode
- Comparing L2 Bridged Mode to Transparent Mode
- Comparison of L2 Bridged Mode to Transparent Mode
- Benefits of Transparent Mode over L2 Bridged Mode
- ARP in Transparent Mode
- VLAN Support in Transparent Mode
- Multiple Subnets in Transparent Mode
- Non-IPv4 Traffic in Transparent Mode
- ARP in L2 Bridged Mode
- VLAN Support in L2 Bridged Mode
- L2 Bridge IP Packet Path
- Multiple Subnets in L2 Bridged Mode
- Non-IPv4 Traffic in L2 Bridged Mode
- L2 Bridge Path Determination
- L2 Bridge Interface Zone Selection
- Sample Topologies
- Configuring Network Interfaces and Activating L2B Mode
- Configuring Layer 2 Bridged Mode
- Asymmetric Routing
- Configuring Interfaces for IPv6
- 31-Bit Network Settings
- PPPoE Unnumbered Interface Support
- Failover & LB
- Neighbor Discovery
- ARP
- MAC IP Anti-Spoof
- Web Proxy
- PortShield Groups
- SonicOS Support of X-Series Switches
- About the X-Series Solution
- Performance Requirements
- Key Features Supported with X-Series Switches
- PortShield Functionality and X-Series Switches
- PoE/PoE+ and SFP/SFP+ Support
- X-Series Solution and SonicPoints
- Managing Extended Switches using GMS
- Extended Switch Global Parameters
- About Links
- Logging and Syslog Support
- Supported Topologies
- Port Graphics
- Port Configuration
- External Switch Configuration
- External Switch Diagnostics
- Configuring PortShield Groups
- SonicOS Support of X-Series Switches
- PoE Settings
- VLAN Translation
- IP Helper
- Dynamic Routing
- DHCP Server
- Configuring a DHCP Server
- Configuring Advanced Options
- Configuring DHCP Option Objects
- Configuring DHCP Option Groups
- Configuring a Trusted DHCP Relay Agent Address Group (IPv4 Only)
- Enabling Trusted DHCP Relay Agents
- Configuring IPv4 DHCP Servers for Dynamic Ranges
- Configuring IPv6 DHCP Servers for Dynamic Ranges
- Configuring IPv4 DHCP Static Ranges
- Configuring IPv6 DHCP Static Ranges
- Configuring DHCP Generic Options for DHCP Lease Scopes
- DHCP and IPv6
- Multicast
- Network Monitor
- AWS Configuration
- SonicWall Support
Configuring DHCP Option Objects
To configure DHCP option objects
- Navigate to NETWORK | System > DHCP Server | DHCPv4/6 Server Settings.
- Click Advanced. The DHCP Advanced Settings dialog displays. The dialogs for IPv4 and IPv6 are slightly different; see IPv4 DHCP Advanced Settings and IPv6 DHCP Advanced Settings.
IPv4 DHCP Advanced Settings
IPv6 DHCP Advanced Settings
- Click +Add. The Add DHCP Option Object dialog displays.
- Type a name for the option in the Option Name field.
- From Option Number, select the option number that corresponds to your DHCP option. For a list of option numbers, names, and descriptions, refer to RFC-Defined DHCP Option Numbers.
Available options differ depending on whether you are configuring an IPv4 or IPv6 option.
- If:
- Only one option type is available, for example, for Option Number 2 (Time Offset), Option Array is dimmed. Go to Step 7.
- There are multiple option types available, for example, for 77 (User Class Information), Option Type becomes available and lists allowable types of the option, such as IP Address, Two-Byte Data, String, or Boolean. Select the option type.
- Type the option value, for example, an IP address, in the Option Value field. If Option Array is checked, multiple values can be entered, separated by a semi-colon (;).
- Click OK. The object displays in the Option Objects table.
Was This Article Helpful?
Help us to improve our support portal