SonicOS 7.1 Objects

Classification

Classification is necessary as a first step so that traffic in need of management can be identified.

For classification of traffic, SonicOS uses:

This provides fine controls using combinations of Address Object, Service Object, and Schedule Object elements, allowing for classification criteria as general as all HTTP traffic and as specific as SSH traffic from host A to server B on Wednesdays at 2:12am.

SonicWall network security appliances have the ability to recognize, map, modify, and generate the industry-standard external CoS (Class of Service) designators, DSCP (Differentiated Services Code Point) and 802.1p. For more information, refer to 802.1p and DSCP QoS.

When identified or classified, traffic can be managed. Management can be performed internally by SonicOS Bandwidth Management (BWM), which is effective as long as the network is a fully contained autonomous system. Once external or intermediate elements are introduced such as foreign network infrastructures with unknown configurations or other hosts contending for bandwidth (for example, the Internet), the ability to offer guarantee and predictability are diminished. In other words, as long as the endpoints of the network and everything in between are within your management, BWM works exactly as configured. Once external entities are introduced, the precision and efficacy of BWM configurations can begin to degrade.

But all is not lost. After SonicOS classifies the traffic, it can tag the traffic to communicate this classification to certain external systems that are capable of abiding by CoS tags, thus they too can participate in providing QoS.

  • Many service providers do not support CoS tags such as 802.1p or DSCP. Also, most network equipment with standard configurations are not able to recognize 802.1p tags, and could drop tagged traffic.
  • Although DSCP does not cause compatibility issues, many service providers will simply strip or ignore the DSCP tags, disregarding the code points.
  • If you wish to use 802.1p or DSCP marking on your network or your service provider’s network, you must first establish that these methods are supported. Verify that your internal network equipment can support CoS priority marking, and that it is correctly configured to do so. Check with your service provider, some offer fee-based support for QoS using these CoS methods.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden