• SonicOS 7.1 Action Objects
• About SonicOS
  • Working with SonicOS
  • SonicOS Workflow
  • How to Use the SonicOS Administration Guides
  • Guide Conventions
  • Common Actions with Objects Table
  • Advanced Filter
• Match Objects
• Zones
  • How Zones Work
  • Default Zones
  • Security Types
  • Allow Interface Trust
  • Effect of Wireless Controller Modes
    • Effects of Enabling Non-Wireless Controller Mode
    • Effects of Enabling Wireless Controller Mode
  • Zones Overview
    • The Zones Page
      • Interpreting the Zones Table
    • Adding a New Zone
      • Adding a New Zone in Policy Mode
      • Adding a New Zone in Classic Mode
      • Configuring a Zone for Guest Access
      • Configuring a Zone for Open Authentication and Social Login
        • Configuring a Zone for Captive Portal Authentication with RADIUS
        • Configuring a Zone for Customized Policy Message
        • Configuring a Zone for Customized Login Page
      • Configuring the WLAN Zone
      • Configuring the RADIUS Server
      • Configuring DPI-SSL Granular Control per Zone
      • Enabling Automatic Redirection to the User-Policy Page
    • Cloning a Zone
    • Editing a Zone
    • Deleting Custom Zones
• Addresses
  • Addresses Page
    • Default Address Objects and Groups
      • Default Pref64 Address Object
      • Default Rogue Address Groups
    • Address Objects
      • Types of Address Objects
      • Adding Address Objects
      • Editing Address Objects
      • Deleting Custom Address Objects
      • Purging MAC or FQDN Address Objects
      • Resolving Address Objects
    • Address Groups
      • Adding Address Groups
      • Editing Address Groups
      • Deleting Custom Address Groups
      • Purging or Resolving All Address Groups
    • Cloning Address Objects or Groups
  • About UUIDs for Address Objects and Groups
  • Working with Dynamic Address Objects
    • Key Features of Dynamic Address Objects
    • Enforcing the Use of Sanctioned Servers on the Network
    • Using MAC and FQDN Dynamic Address Objects
      • Blocking All Protocol Access to a Domain using FQDN DAOs
      • Using an Internal DNS Server for FQDN-based Access Rules or Security Policies
      • Controlling a Dynamic Host’s Network Access by MAC Address
      • Bandwidth Managing Access to Entire Domain
• Services
  • Default Service Objects and Groups
  • Default IP Protocols for Custom Service Objects
  • Service Objects
    • Adding Service Objects using Default Protocols
    • Adding Service Objects using Custom Protocols
    • Editing Service Objects
    • Deleting Custom Service Objects
  • Service Groups
    • Adding Custom Service Groups
    • Editing Service Groups
    • Deleting Custom Service Groups
  • Adding Custom IP Protocol Services
    • Configuration Example
• URI Lists
  • About URIs and the URI List
  • About Keywords and the Keyword List
  • Matching URI List Objects
    • Normal Matching
    • Wildcard Matching
    • IPv6 Address Matching
    • IPv6 Wildcard Matching
  • Using URI List Objects
  • About URI List Groups
  • Managing URI List Objects
    • About the URI List Objects Table
    • Adding URI List Objects
      • Adding URIs
      • Importing URIs
      • Adding Keywords
      • Importing Keywords
    • Exporting URI List Objects
    • Editing URI List Objects
    • Deleting URI List Objects
  • Managing URI List Groups
    • About the URI List Groups Table
    • Adding URI List Groups
    • Editing a URI List Group
    • Deleting URI List Groups
  • Applying URI List Object or Group
• Schedules
  • Default Schedules
  • Adding Custom Schedules
  • Editing Schedules
  • Deleting Custom Schedules
  • Applying Schedules
• Dynamic Group
  • About Dynamic External Address Group File
  • DEAG and DEAO Maximums
  • High Availability Requirements
  • Adding Dynamic External Objects
  • Editing Dynamic External Objects
  • Deleting Dynamic External Objects
  • Applying Dynamic External Objects
• Email Addresses
  • Adding Email Address Objects
  • Editing Email Address Objects
  • Deleting Email Address Objects
  • Applying Email Addresses Objects
• Match Objects
  • Match Objects
    • Input representation
    • Supported Match Object Types
    • Regular Expressions
      • Regular Expression Syntax
    • Negative Matching
    • Adding Match Objects
    • Editing Match Objects
  • Application Objects
    • Adding Application Objects
    • Editing Application Objects
    • Adding Category Objects
    • Editing Category Objects
  • Deleting Match Objects or Application Objects
  • Applying Match Objects and Application Objects
• Countries
  • Country Objects
  • Country Groups
    • Adding Country Groups
    • Editing Country Groups
    • Deleting Custom Country Groups
  • Applying Country Groups
• Applications
  • Application Objects
  • Application Groups
    • Adding Application Groups
    • Editing Application Groups
    • Deleting Application Groups
  • Applying Application Groups
• Web Categories
  • Web Category Objects
  • Web Category Groups
    • Adding Web Category Groups
    • Editing Web Category Groups
    • Deleting Web Category Groups
  • Applying Web Category Groups
• Websites
  • Website Objects
    • Adding Website Objects
    • Editing Website Objects
  • Website Groups
    • Adding Website Groups
    • Editing Website Groups
  • Deleting Website Objects or Groups
  • Applying Website Groups
• Match Patterns
  • About Match Patterns
    • Regular Expressions
    • Negative Matching
  • Adding Match Patterns
  • Editing Match Patterns
  • Deleting Match Patterns
  • Applying Match Patterns
• Custom Match
  • Custom Match Objects
  • Custom Match Groups
  • Editing Custom Objects or Groups
  • Deleting Custom Objects or Groups
  • Applying Custom Match Groups
• Profile Objects
• Endpoint Security
  • Prerequisites
  • Adding Endpoint Security Profiles
  • Editing Endpoint Security Profiles
  • Deleting Endpoint Security Profiles
  • Applying Endpoint Security Profiles
• Bandwidth
  • Configuring Bandwidth Profile Objects
    • Defining Bandwidth Profile Object Settings
      • General Settings of Bandwidth Profile Object
      • Elemental Settings of Bandwidth Profile Object
    • Enabling BWM on an Interface
  • Editing Bandwidth Profile Objects
  • Deleting Bandwidth Profile Objects
  • Applying Bandwidth Profile Objects
• QoS Marking
  • Classification
  • Marking
  • Conditioning
    • Site to Site VPN over QoS Capable Networks
    • Site to Site VPN over Public Networks
  • 802.1p and DSCP QoS
    • 802.1p Marking
    • DSCP Marking
      • DSCP Marking and Mixed VPN Traffic
      • Configure for 802.1p CoS 4 – Controlled Load
  • Mapping of QoS Tags
  • Configuring QoS Marking
  • Applying QoS Marking
    • QoS Marking Actions
    • Bi-directional DSCP Tag Action
      • Remote Site 1: Sample Access Rule or Security Rule Configuration
      • Main Site: Sample Access Rule or Security Rule Configurations
• Content Filter
  • About CFS Profile Objects
    • About UUIDs for CFS Profile Objects
  • Adding CFS Profile Objects
    • Advanced Screen
    • Consent
    • Custom Header Screen
  • Editing CFS Profile Objects
  • Deleting CFS Profile Objects
  • Applying Content Filter Profile Objects
• DHCP Option
  • Prerequisites
  • Adding DHCP Option Objects
    • RFC-Defined DHCPV4 Option Numbers
    • RFC-Defined DHCPV6 Option Numbers
  • Editing DHCP Option Objects
  • Deleting DHCP Option Objects
  • Applying DHCP Option Objects
• DNS Filtering
  • Prerequisites
  • Adding DNS Filtering Profile Objects
  • Editing DNS Filtering Profile Objects
  • Deleting DNS Filtering Profile Objects
  • Applying DNS Filtering Profile Objects
• Block Page
  • Adding Custom Block Pages
  • Cloning Block Page
  • Editing Block Pages
  • Deleting Block Pages
  • Applying Block Pages
• Anti-Spyware
  • Viewing Anti-Spyware Objects
  • Enabling or Disabling Anti-Spyware Objects
  • Adding Anti-Spyware Profiles
  • Editing Anti-Spyware Profiles
  • Cloning Anti-Spyware Profiles
  • Deleting Anti-Spyware Profiles
  • Applying Anti-Spyware Profiles
• Gateway Anti-Virus
  • Viewing Gateway Anti-Virus Objects
  • Enabling or Disabling Gateway Anti-Virus Objects
  • Adding Gateway Anti-Virus Profiles
  • Cloning Gateway Anti-Virus Profiles
  • Editing Gateway Anti-Virus Profiles
  • Deleting Gateway Anti-Virus Profiles
  • Applying Gateway Anti-Virus Profiles
• Log and Alerts
  • Adding Log and Alerts Profiles
  • Editing Log and Alert Profiles
  • Deleting Log and Alert Profiles
  • Applying Log Alerts Profiles
• Intrusion Prevention
  • Viewing Intrusion Prevention Objects
  • Enabling or Disabling Intrusion Prevention Objects
  • Adding Intrusion Prevention Profiles
  • Editing Intrusion Prevention Profiles
  • Cloning Intrusion Prevention Profiles
  • Deleting Intrusion Prevention Profiles
  • Applying Intrusion Prevention Profiles
• AWS
  • AWS Objects
    • About Address Object Mapping with AWS
      • Tagging an EC2 Instance on AWS
    • Viewing Instance Properties in SonicOS
    • Creating a New Address Object Mapping
    • Enable Mapping
    • Configuring Synchronization
    • Configuring Regions to Monitor
    • Verifying AWS Address Objects and Groups
• Action Profiles
• Security Action Profile
  • Security Actions
  • Adding Security Action Profiles
    • Bandwidth/QoS
      • Bandwidth
      • Configuring a Bandwidth/QoS Security Action Profile
    • Anti-Virus
    • Intrusion Prevention
    • Anti-Spyware
    • Botnet Filter
    • Content Filter
      • General
      • Passphrase
      • Confirm
      • Consent
      • Custom Header
    • Block Page and Logging
    • Miscellaneous
  • Editing Security Action Profiles
  • Cloning Security Action Profiles
  • Deleting Security Action Profiles
  • Applying Security Action Profiles
• DoS Action Profile
  • DoS Actions
  • Adding DoS Action Profiles
    • Flood Protection
      • Layer 3 SYN Flood Protection - SYN Proxy
      • Layer 2 SYN/RST/FIN Flood Protection
      • UDP Flood Protection
      • ICMP Flood Protection
    • DDoS Protection
    • Attack Protection
    • Connection Limiting
  • Editing DoS Action Profiles
  • Cloning DoS Action Profiles
  • Deleting DoS Action Profiles
  • Applying DoS Action Profiles
• Action Objects
• App Rule Actions
  • Action Objects
    • Default Action Objects
    • Action Types for Custom Action Objects
  • Actions Using Bandwidth Management
    • Bandwidth Management Methods
    • Viewing Bandwidth Management Information on App Rule Actions
  • Adding Action Objects
    • Configuring Bandwidth App Rule Action Objects
  • Editing Action Objects
  • Deleting Action Objects
  • Applying App Rule Actions
    • Related Tasks for Actions Using Packet Monitoring
      • Capturing Packets Related to a Policy
      • Configuring Mirroring
• Content Filter Actions
  • Content Filter Objects
    • CFS Action Objects
    • About Passphrase Feature
    • About Confirm Feature
    • UUIDs for CFS Objects
  • Managing CFS Action Objects
    • About the CFS Action Objects Table
    • Adding CFS Action Objects
      • Block
      • Passphrase
      • Confirm
      • BWM
    • Editing CFS Action Objects
    • Deleting CFS Action Objects
  • Applying Content Filter Objects
• Object viewer
• SonicWall Support
  • About This Document

Confirm

Confirm helps to build a restricted web page that requires the user confirmation to access.

• Requiring confirmation (consent) only works for HTTP requests. HTTPS requests cannot be redirected to a Confirm page.
• For HTTPS sites, Client DPI-SSL with Content Filter must be enabled to apply Confirm. For more information, refer to About Confirm Feature.

To create a restricted web page that requires confirmation

1. Navigate to OBJECT | Action Profiles > Security Action Profile.

2. Do one of the following:

   • Add a new Security Action Profile.

     1. Click the Add icon.
     2. Enter an Action Profile Name.

   • Edit an existing Security Action Profile.

     Hover over an existing Security Action Profile and click the Edit icon.

3. Click the Content Filter tab.
4. Enable Content Filtering to activate SonicWall's Content Filtering service.

5. Select a Content Filter Action.

   • None
   • Confirm
   • Passphrase

   The content filter action is applied to your security rule using the profile that has the action set to CFS.

6. Scroll to the Confirm option.

   

7. Enter the effective duration, in minutes, for a confirmed user based on category or domain in the Active Time (minutes) field.

   The minimum time is 1, the maximum is 9999, and the default is 60.

8. Do one of the following with Confirm Page code:

   1. No action is required to continue with the default web page.
   2. Make the necessary changes to the default code if you want to customize the web page.
   3. Click Clear and enter your own code for a new web page.

9. Click Preview to preview the web page.

   If you continue with the default web page, web site URL, Client IP address, policy, reason for the block, and active minutes along with a field for entering the confirmation are shown in the preview.

   

10. Click Close to go back to Security Action Profile page.
11. Click Default if you wish to continue with the default blocked page.
12. Click Save.