SonicOS 7.1 Objects
- SonicOS 7.1 Action Objects
- About SonicOS
- Match Objects
- Zones
- How Zones Work
- Default Zones
- Security Types
- Allow Interface Trust
- Effect of Wireless Controller Modes
- Zones Overview
- The Zones Page
- Adding a New Zone
- Adding a New Zone in Policy Mode
- Adding a New Zone in Classic Mode
- Configuring a Zone for Guest Access
- Configuring a Zone for Open Authentication and Social Login
- Configuring the WLAN Zone
- Configuring the RADIUS Server
- Configuring DPI-SSL Granular Control per Zone
- Enabling Automatic Redirection to the User-Policy Page
- Cloning a Zone
- Editing a Zone
- Deleting Custom Zones
- Addresses
- Addresses Page
- About UUIDs for Address Objects and Groups
- Working with Dynamic Address Objects
- Services
- URI Lists
- Schedules
- Dynamic Group
- Email Addresses
- Match Objects
- Countries
- Applications
- Web Categories
- Websites
- Match Patterns
- Custom Match
- Profile Objects
- Endpoint Security
- Bandwidth
- QoS Marking
- Content Filter
- DHCP Option
- DNS Filtering
- Block Page
- Anti-Spyware
- Gateway Anti-Virus
- Log and Alerts
- Intrusion Prevention
- AWS
- Action Profiles
- Security Action Profile
- DoS Action Profile
- Action Objects
- App Rule Actions
- Content Filter Actions
- Object viewer
- SonicWall Support
AWS
Before setting up AWS objects or groups, make sure that the firewall is configured with the AWS credentials. You can configure the firewall with AWS on NETWORK | System > AWS Configuration page and validate the settings using the Test Configuration before proceeding. For more information, refer to Configuring AWS Credentials in the SonicOS System Setup administration documentation.
You can find the configuration link on the OBJECT | Profile Objects > AWS page also if AWS is not yet configured. Click the link which directs you to the NETWORK | System > AWS Configuration page.
Was This Article Helpful?
Help us to improve our support portal