SonicOS 7.0 Security Services Administration Guide

Download PDF
Technical Documentation > SonicOS 7.0 Security Services Administration Guide > Intrusion Prevention Service > Enabling Intrusion Prevention Services

Enabling Intrusion Prevention Services

To enable Intrusion Prevention settings for one or more Objects per zone

  1. Under Object, navigate to Match Object > Zones.

  2. Select the Zone for which Intrusion Prevention IPS has to be enabled and click on edit button. Switch on the Enable IPS toggle button.

  3. Click Save.

To enable Intrusion Prevention settings for one or more SonicWall network security appliance

  1. Under Policy, navigate to Security Services > Intrusion Prevention.

  2. Under Status/Settings page, enable the Enable IPS Gobal Settings toggle button.

  3. Click Accept.

  4. Enable/Disable PREVENT ALL and DETECT ALL button for the SIGNATURE GROUPS.

  5. Click on the Configure button.

  6. Enable the Enable IPS Exclusion List toggle button and select the from below options:

    1. Select Use Address Object.

      From the dropdown box select an existing object for Use Address Object or select Create new address object... from the dropdown.

      Provide the details of the object and click Save.

    2. Select Use Address Range and click on Add.

      Provide the details and click OK.

  7. On successful IPS configuration, click Accept.

To edit IPS Signatures

  1. Under Policy, navigate to Security Services > Intrusion Prevention. Under Signature, hover on the signature that needs to be updated and click on the edit button.

  2. Update the details and click OK.

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden