SonicOSX 7 System

Download PDF
Technical Documentation > SonicOSX 7 System > Interfaces > About Interfaces > IPS Sniffer Mode > Sample IPS Sniffer Mode Topology

Sample IPS Sniffer Mode Topology

This example topology uses SonicWall IPS Sniffer Mode in a Hewlett Packard ProCurve switching environment. This scenario relies on the ability of HP’s ProCurve Manager Plus (PCM+) and HP Network Immunity Manager (NIM) server software packages to throttle or close ports from which threats are emanating.

This method is useful in networks where there is an existing appliance that remains in place, but you wish to use the appliance’s security services as a sensor.

IPS Sniffer Mode: Sample Topology

IPS Sniffer Mode: Sample Topology

In this deployment the WAN interface and zone are configured for the internal network’s addressing scheme and attached to the internal network. The X2 port is Layer 2 bridged to the LAN port, but it is not attached to anything. The X0 LAN port is configured to a second, specially programmed port on the HP ProCurve switch. This special port is set for mirror mode: it forwards all the internal user and server ports to the “sniff” port on the firewall. This allows the firewall to analyze the entire internal network’s traffic, and if any traffic triggers the security signatures it immediately traps out to the PCM+/NIM server through the X1 WAN interface, which then can take action on the specific port from which the threat is emanating.

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden