SonicOS 7 NSv Getting Started Guide for AWS

Using the Virtual Console and SafeMode > Using SafeMode on the NSv > Enabling SafeMode
Table of Contents

Enabling SafeMode

SafeMode can be enabled from the management console.

To enable SafeMode

  1. Access the NSv management console as described in one of:

  2. In the console, select the Reboot | Shutdown option and then press Enter.

  3. Navigate down to the Boot SonicWall into safemode option to highlight Enable, and then press Enter.

  4. Select Yes in the confirmation dialog.

  5. Press Enter.

    The NSv immediately reboots and comes back up in SafeMode.

    In SafeMode, the web interface is served from an HTTP server. The HTTPS server is not started in SafeMode.