• SonicOS NSv 7
• Introducing the NSv Series
  • Feature Support Information
  • Product Matrix and Requirements
  • Backup and Recovery Information
  • Exporting and Importing Firewall Configurations
  • Github Repository
  • Upgrading from SonicOS 6.5
  • Upgrading to a Higher Capacity NSv Model
  • Creating a MySonicWall Account
• Installing SonicOS on the NSv Series
  • Supported NSv Models
  • Resizing NSv Virtual Machine
  • Task List for NSv Instance Setup
  • Deploying AWS from Console
  • Deploying AWS from Cloud Template
  • Accessing the SonicWall NSv Web Interface
  • Forwarding Traffic to your NSv
  • Configuring Internet/Public Access Through the NSv
  • SonicWall Nsv Firewall on AWS GovCloud
    • Deploying AWS Government Cloud from Console
    • Configuring Security Profile
    • Applying Security Services on Policies in NSv for Outbound Traffic
    • Deploying Windows 10 from Console
    • Creating a Security Policy and NAT Policy for Inbound RDP to the VM
  • Troubleshooting Installation Configuration
    • Insufficient Memory Assignment
    • PAYG Installation Errors
• Licensing and Registering Your NSv
  • Registering the NSv Virtual Machine as BYOL from SonicOS
  • Registering the NSv Virtual Machine as PAYG
• SonicOS Management
  • Managing SonicOS on the NSv Series
  • Using System Diagnostics
• Using the Virtual Console and SafeMode
  • Connecting to the Management Console with SSH
  • Navigating the NSv Management Console
    • System Info
    • Management Network or Network Interfaces
    • Test Management Network
    • Diagnostics
    • NTP Server
    • Lockdown Mode
      • Temporary Lockdown Mode
    • System Update
    • Reboot | Shutdown
    • About
    • Logs
  • Using SafeMode on the NSv
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Management Network in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
  • Using the SafeMode Web Interface
    • Accessing the SafeMode Web Interface
    • Entering/Exiting SafeMode
    • Locking and Unlocking the Management Console
    • Downloading the SafeMode Logs
    • Uploading a New Image in SafeMode
• SonicWall Support
  • About This Document

Accessing the SafeMode Web Interface

To access the SafeMode web interface

1. Navigate to the AWS E2C Management Console page and view the Instances page for your NSv.

   

2. In the Instances page, locate the public IP address assigned to the NSv and the Instance ID for your NSv.

   You can access the SafeMode web interface at the public IP address of the NSv, and you must authenticate to gain access.

   In SafeMode, the web management interface is only available by way of http (not https).

   The web interface address is also given on the management console screen as shown in the following image.

   

3. Go into the management console and boot into SafeMode. See Entering SafeMode under Using SafeMode on the NSv.

4. In a web browser, navigate to http://<NSv public IP address>, using the applicable IP address. The SafeMode authentication screen displays.

   

5. In the AWS EC2 Instance ID field, enter the Instance ID for the NSv.

6. Click Authenticate. The SafeMode web interface displays.