• SonicOS NSv 7
• Introducing the NSv Series
  • Feature Support Information
  • Product Matrix and Requirements
  • Backup and Recovery Information
  • Exporting and Importing Firewall Configurations
  • Github Repository
  • Upgrading from SonicOS 6.5
  • Upgrading to a Higher Capacity NSv Model
  • Creating a MySonicWall Account
• Installing SonicOS on the NSv Series
  • Supported NSv Models
  • Resizing NSv Virtual Machine
  • Task List for NSv Instance Setup
  • Deploying AWS from Console
  • Deploying AWS from Cloud Template
  • Accessing the SonicWall NSv Web Interface
  • Forwarding Traffic to your NSv
  • Configuring Internet/Public Access Through the NSv
  • SonicWall Nsv Firewall on AWS GovCloud
    • Deploying AWS Government Cloud from Console
    • Configuring Security Profile
    • Applying Security Services on Policies in NSv for Outbound Traffic
    • Deploying Windows 10 from Console
    • Creating a Security Policy and NAT Policy for Inbound RDP to the VM
  • Troubleshooting Installation Configuration
    • Insufficient Memory Assignment
    • PAYG Installation Errors
• Licensing and Registering Your NSv
  • Registering the NSv Virtual Machine as BYOL from SonicOS
  • Registering the NSv Virtual Machine as PAYG
• SonicOS Management
  • Managing SonicOS on the NSv Series
  • Using System Diagnostics
• Using the Virtual Console and SafeMode
  • Connecting to the Management Console with SSH
  • Navigating the NSv Management Console
    • System Info
    • Management Network or Network Interfaces
    • Test Management Network
    • Diagnostics
    • NTP Server
    • Lockdown Mode
      • Temporary Lockdown Mode
    • System Update
    • Reboot | Shutdown
    • About
    • Logs
  • Using SafeMode on the NSv
    • Enabling SafeMode
    • Disabling SafeMode
    • Configuring the Management Network in SafeMode
      • Configuring Interface Settings
      • Disabling an Interface
  • Using the SafeMode Web Interface
    • Accessing the SafeMode Web Interface
    • Entering/Exiting SafeMode
    • Locking and Unlocking the Management Console
    • Downloading the SafeMode Logs
    • Uploading a New Image in SafeMode
• SonicWall Support
  • About This Document

Test Management Network

The Test Management Network screen is displayed for an NSv, but not for an NSv. In an NSv, the Ping and Nslookup commands are available on the Diagnostics screen.

The Test Management Network screen provides the Ping and Nslookup tools to test connectivity between the management interface and the local network. Ping is used to test whether hosts in the network are reachable. Nslookup is available for sending DNS queries from the NSv virtual machine.

To use Ping

1. Select Test Management Network in the Menu and press Tab to move the focus into the Test Management Network screen.

2. Select Ping to highlight it and then press Enter to display the Enter IP address dialog.

3. Navigate into the dialog, press Backspace to clear the current value, and then type in the IP address that you want to ping.

4. Press Enter.

   The ping output is displayed in the Ping host dialog.

   

5. Press the Esc key to close the dialog.

To use Nslookup

1. Select Test Management Network in the Menu and press Tab to move the focus into the Test Management Network screen.

2. Select Nslookup to highlight it and press Enter to display the Enter hostname dialog.

   

3. Navigate into the dialog, press Backspace to clear the current value, and then type in the hostname that you want to look up with a DNS query.

4. Press Enter.

   The Nslookup query results are displayed in an information dialog. You can scroll up and down within the dialog by using the up/down arrow keys.

   

5. Press the Esc key to close the dialog.