SonicOSX 7 Device Settings

Configuring Time Settings > Configuring NTP Settings > Adding an NTP Server
Table of Contents

Adding an NTP Server

To add an NTP server to the firewall configuration

  1. Click NTP Servers tab on Device | Settings > Time page.
  2. Click the +Add button.

    3. The Add NTP Server dialog is displayed.

  3. Type the IP address of the remote NTP server in the NTP Server field.

  4. Select the authentication type from the NTP Auth Type drop-down list:
    1. No Auth - Authentication is not required and the following three options are dimmed. Go to Step 8.
    2. MD5 - Authentication is required and the following three options are active.
  5. Enter the Trust Key number in the Trust Key No field. The minimum is 1 and the maximum is 65535.
  6. Enter the Key number in the Key Number field. The minimum is 1 and the maximum is 65535.
  7. Enter the password in the Password field.
  8. Click Add. A Success message is displayed.

  9. Click Close to return to the NTP Servers screen. The NTP Server table shows the added server.