Creating a Local Backup Firmware Image

To create a local backup file

1. Navigate to Device | Settings > Firmware and Settings.

2. Click Create Backup > Local Backup.

   

3. In the Local Backup dialog, do the following to create a backup:

   

   1. Enabling Retain Local Backup option for local backup helps to retain configuration file so it is not overwritten during auto or local backup. To retain local backup, enable Retain Local Backup.
   2. Enter comments in the Comments field.
   3. Click OK.

   The backup image created on local storage is listed under LOCAL section.

you must perform these steps each time for a local backup.