Enabling Wireless LAN and IPv6

To enable the visibility of a wireless LAN and/or IPv6

1. Navigate to Device | Settings > Administration > Firewall Administrator.

2. Click Enable Wireless LAN and/or Enable IPv6. These options are selected by default. A confirmation message is displayed.

   Enabling or disabling the Wireless LAN feature requires a restart of the firewall.

   

   When WLAN is disabled:

   • All access point and wireless-related management interface pages do not display.
   • WLAN is not displayed as a zone type.
   • Any existing WLAN zones or objects become uneditable.

   When IPv6 is disabled, all IPv6 packets are dropped by the firewall and the Monitor | Tools and Monitor > Packet Monitor page displays the log messages.

3. Click OK.