• SonicOS 7.0
• Wireless Overview
  • Device Support
  • Compliance
  • Considerations for Using Wireless Connections
  • Adjusting the Antennas
  • Wireless Node Count Enforcement
  • About MAC Address Filtering
• Status
  • WLAN Settings
  • WLAN Statistics
  • WLAN Activities
  • Station Status
• Settings
  • Access Point
    • Wireless Settings
      • 802.11n Wireless Settings
      • 802.11a/b/g Wireless Settings
      • 802.11ac Wireless Settings
    • Wireless Virtual Access Point
  • Wireless Station
    • Wireless Settings
    • Advanced Radio Settings
  • Access Point & Station
    • Wireless Settings
    • Wireless Virtual Access Point
    • Station Setting
• Security
  • About Authentication
  • Configuring the WEP Settings
  • Configuring WPA3/WPA2/WPA PSK Settings
  • Configuring WPA3/WPA2/WPA EAP Settings
• Advanced
  • Beaconing and SSID Controls
  • Green Access Point
  • Advanced Radio Settings
    • Configurable Antenna Diversity
• MAC Filter List
  • Deployment Considerations
  • Configuring MAC Filter List
• IDS - Wireless Intrusion Detection Service
  • Configuring IDS Settings
  • Discovered Access Points
• Virtual Access Point
  • Wireless Virtual AP Configuration Task List
  • Virtual Access Point Profiles
    • Virtual Access Point Schedule Settings
    • Virtual Access Point Profile Settings
      • WEP Encryption Settings
      • WPA-PSK / WPA2-PSK Encryption Settings
      • RADIUS Server Settings
    • ACL Enforcement
  • Virtual Access Point Objects
    • VAP General Settings
    • VAP Advanced Settings
  • Virtual Access Point Groups
  • Enabling the Virtual Access Point Group
• SonicWall Support
  • About This Document

Advanced Radio Settings

To set the Advanced Radio Settings

1. Set the Antenna Diversity. The default value is Best.

2. Select the Transmit Power from the drop-down menu:

   • Full Power sends the strongest signal on the WLAN. For example, select Full Power if the signal is going from building‐to‐building.
   • Half (‐3 dB) is recommended for office‐to‐office within a building.
   • Quarter (‐6 dB) is recommended for short distance communications.
   • Eighth (‐9 dB) is recommended for shorter distance communications.
   • Minimum is recommended for very short distance communications.
3. Specify the Fragmentation Threshold (bytes). The minimum value can be 256 and the maximum is 2346. The default is set to the maximum.
4. Set the RTS Threshold (bytes). The minimum is 1 and the maximum is 2346, which also the default.

5. Click Accept to save the settings.

   You can click Restore Default Settings to return to the factory default settings.