• SonicOS 7.0
• Wireless Overview
  • Device Support
  • Compliance
  • Considerations for Using Wireless Connections
  • Adjusting the Antennas
  • Wireless Node Count Enforcement
  • About MAC Address Filtering
• Status
  • WLAN Settings
  • WLAN Statistics
  • WLAN Activities
  • Station Status
• Settings
  • Access Point
    • Wireless Settings
      • 802.11n Wireless Settings
      • 802.11a/b/g Wireless Settings
      • 802.11ac Wireless Settings
    • Wireless Virtual Access Point
  • Wireless Station
    • Wireless Settings
    • Advanced Radio Settings
  • Access Point & Station
    • Wireless Settings
    • Wireless Virtual Access Point
    • Station Setting
• Security
  • About Authentication
  • Configuring the WEP Settings
  • Configuring WPA3/WPA2/WPA PSK Settings
  • Configuring WPA3/WPA2/WPA EAP Settings
• Advanced
  • Beaconing and SSID Controls
  • Green Access Point
  • Advanced Radio Settings
    • Configurable Antenna Diversity
• MAC Filter List
  • Deployment Considerations
  • Configuring MAC Filter List
• IDS - Wireless Intrusion Detection Service
  • Configuring IDS Settings
  • Discovered Access Points
• Virtual Access Point
  • Wireless Virtual AP Configuration Task List
  • Virtual Access Point Profiles
    • Virtual Access Point Schedule Settings
    • Virtual Access Point Profile Settings
      • WEP Encryption Settings
      • WPA-PSK / WPA2-PSK Encryption Settings
      • RADIUS Server Settings
    • ACL Enforcement
  • Virtual Access Point Objects
    • VAP General Settings
    • VAP Advanced Settings
  • Virtual Access Point Groups
  • Enabling the Virtual Access Point Group
• SonicWall Support
  • About This Document

Station Setting

To configure the station settings

1. Navigate to DEVICE | Internal Wireless > Settings.
2. In the Radio Role field, select Access Point & Station from the drop-down menu.
3. Scroll down to the STATION SETTING section.
4. Toggle Enable Station Mode to enable it.
5. Enter the AP SSID in the field provided. This is the access point name that users will see when connecting.

6. Select the AP Authentication Type from the drop-down menu. Choose from:

   • OPEN
   • WPA2-AUTO-PSK
   • WPA3-PSK
7. If a WPA authentication type is selected, type in a Pre-Shared Key.
8. Select a VLAN ID from the drop-down menu. To appear in the list, the VLAN ID must already have been created. The VLAN allows the internal wireless radio to identify which traffic belongs to this subnet. You can create VLAN interfaces in the NETWORK | System > Interfaces page by clicking Add Interface at the top of the Interface Settings screen.
9. Toggle Use Wireless Interface as WAN to enable access outside your local network. This option changes the wireless interface to a WAN zone interface that can provide WAN access.
10. Click Accept to save the settings.