• SonicOS 7.0
• Wireless Overview
  • Device Support
  • Compliance
  • Considerations for Using Wireless Connections
  • Adjusting the Antennas
  • Wireless Node Count Enforcement
  • About MAC Address Filtering
• Status
  • WLAN Settings
  • WLAN Statistics
  • WLAN Activities
  • Station Status
• Settings
  • Access Point
    • Wireless Settings
      • 802.11n Wireless Settings
      • 802.11a/b/g Wireless Settings
      • 802.11ac Wireless Settings
    • Wireless Virtual Access Point
  • Wireless Station
    • Wireless Settings
    • Advanced Radio Settings
  • Access Point & Station
    • Wireless Settings
    • Wireless Virtual Access Point
    • Station Setting
• Security
  • About Authentication
  • Configuring the WEP Settings
  • Configuring WPA3/WPA2/WPA PSK Settings
  • Configuring WPA3/WPA2/WPA EAP Settings
• Advanced
  • Beaconing and SSID Controls
  • Green Access Point
  • Advanced Radio Settings
    • Configurable Antenna Diversity
• MAC Filter List
  • Deployment Considerations
  • Configuring MAC Filter List
• IDS - Wireless Intrusion Detection Service
  • Configuring IDS Settings
  • Discovered Access Points
• Virtual Access Point
  • Wireless Virtual AP Configuration Task List
  • Virtual Access Point Profiles
    • Virtual Access Point Schedule Settings
    • Virtual Access Point Profile Settings
      • WEP Encryption Settings
      • WPA-PSK / WPA2-PSK Encryption Settings
      • RADIUS Server Settings
    • ACL Enforcement
  • Virtual Access Point Objects
    • VAP General Settings
    • VAP Advanced Settings
  • Virtual Access Point Groups
  • Enabling the Virtual Access Point Group
• SonicWall Support
  • About This Document

VAP General Settings

To define the Virtual Access Point General settings

1. Navigate to the DEVICE | Internal Wireless > Virtual Access Point > Virtual Access Point Objects page.
2. To edit an existing virtual access point, click the Edit icon for that access point. To create a new access point, click on Add.
3. On the General screen, in the Name field, create a friendly name for the access point.
4. In the SSID field, type in a unique name. This name is a unique identifier attached to the packet header. It is case sensitive and can be up to 32 alphanumeric characters. The SSID is seen when users look for a Wi-Fi connection.
5. Select the VLAN ID from the drop-down menu. To appear in the list, the VLAN ID must already have been created. The VLAN allows the internal wireless radio to identify which traffic belongs to this subnet. You can create VLAN interfaces in the NETWORK | System > Interfaces page by clicking Add Interface at the top of the Interface Settings screen.
6. Toggle Enable Virtual Access Point option to enable it.
7. Toggle Enable SSID Suppress option if you do not want your SSID to be seen by unauthorized wireless clients. When enabled, it suppresses the broadcasting of the SSID name and disables responses to probe requests.
8. Click Accept.