• SonicOS 7.0
• Wireless Overview
  • Device Support
  • Compliance
  • Considerations for Using Wireless Connections
  • Adjusting the Antennas
  • Wireless Node Count Enforcement
  • About MAC Address Filtering
• Status
  • WLAN Settings
  • WLAN Statistics
  • WLAN Activities
  • Station Status
• Settings
  • Access Point
    • Wireless Settings
      • 802.11n Wireless Settings
      • 802.11a/b/g Wireless Settings
      • 802.11ac Wireless Settings
    • Wireless Virtual Access Point
  • Wireless Station
    • Wireless Settings
    • Advanced Radio Settings
  • Access Point & Station
    • Wireless Settings
    • Wireless Virtual Access Point
    • Station Setting
• Security
  • About Authentication
  • Configuring the WEP Settings
  • Configuring WPA3/WPA2/WPA PSK Settings
  • Configuring WPA3/WPA2/WPA EAP Settings
• Advanced
  • Beaconing and SSID Controls
  • Green Access Point
  • Advanced Radio Settings
    • Configurable Antenna Diversity
• MAC Filter List
  • Deployment Considerations
  • Configuring MAC Filter List
• IDS - Wireless Intrusion Detection Service
  • Configuring IDS Settings
  • Discovered Access Points
• Virtual Access Point
  • Wireless Virtual AP Configuration Task List
  • Virtual Access Point Profiles
    • Virtual Access Point Schedule Settings
    • Virtual Access Point Profile Settings
      • WEP Encryption Settings
      • WPA-PSK / WPA2-PSK Encryption Settings
      • RADIUS Server Settings
    • ACL Enforcement
  • Virtual Access Point Objects
    • VAP General Settings
    • VAP Advanced Settings
  • Virtual Access Point Groups
  • Enabling the Virtual Access Point Group
• SonicWall Support
  • About This Document

VAP Advanced Settings

The Advanced settings screen provides schedule settings, authentication and encryption settings, and other settings for this virtual access point. The options are the same as those you define for a Virtual Access Point Profile.

To define the Virtual Access Point Advanced settings

1. Navigate to the DEVICE | Internal Wireless > Virtual Access Point > Virtual Access Point Objects page.
2. To edit an existing virtual access point, click the Edit icon for that access point. To create a new access point, click on Add.
3. Click Advanced.
4. In the Virtual Access Point Schedule Settings section, set the schedule for when this VAP is active and available.
5. In the Virtual Access Point Profile Settings section, choose a Profile Name from the drop-down menu. All the settings for that profile are auto-filled from the profile.
6. If you do not want to use a profile, leave the Profile Name set to No Profile and fill in the remaining fields as described in Virtual Access Point Profiles.
7. Click Accept.