SonicOS 7.1 Users

Test

Performing tests on this page applies any changes that have been made.

You can test the connectivity between the appliance and an SSO agent or TSA. You can also test whether the SSO agent is properly configured to identify a user logged into a workstation.

  1. Navigate to the Device > Users > Settings > Authentication page.
  2. Next to Configure SSO, click Configure.

    The SSO Configuration page is displayed.

  3. Under the Test tab, select the following:

    1. Select the SSO agent or TSA to test from the Select agent to test drop-down menu.

    2. In Test select one of the following:

      • Check agent connectivity:This tests communication with the authentication agent. If the firewall can connect to the SSO agent, the message Agent is ready displays.

      • Check user: enter the IP address of a workstation in the Workstation IP address field and select one of the following:

        • From other mechanisms
        • Via NetAPI/WMI

        • Allow Both

    3. Click Test.

This tests if the SSO agent is properly configured to identify the user logged into a workstation.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden