Adding or Editing Partition Policies

To add a partition policies

1. Navigate to Device > Users > Partitions.
2. In the Partition Selection Policies section, click the Add icon.

   The Add Partition Policies dialog is displayed.

3. In For select the partition policy for the following type of users.

   • users located at: A policy to select the default partition for users located at default zone.

   • remote users connected via: A policy to select the default partition for remote access when that cannot be derived from the supplied user name.

   • console port login: A policy to select the default partition for login on the console port when that cannot be derived from the supplied user name.

4. If you have selected users located at, then select the Zone from the drop-down menu.

   • Any

   • LAN

   • DMZ

5. If you have selected users located at, then select the Interface from the drop-down menu.

   • Any

   • X0

6. If you have selected users located at, then select the Network from the drop-down menu. The default is Any.

7. In the Select partition drop-down select Default.

8. Optionally, enter a comment in the Comment field.
9. Click Save.

To edit a partition policy

1. In the Partition Selection Policies section, click the Edit icon in the Configuration column to edit the partition policies.

   The Add Partition Policies dialog is displayed.

2. Repeat the above steps to edit the policy.