SonicOS 7.1 Device Settings
- SonicOS 7.1
- About SonicOS
- About Device Settings
- Managing SonicWall Licenses
- System Administration
- Configuring the Firewall Name
- Enabling Wireless LAN and IPv6
- Changing the Administrator Name and Password
- Configuring Login Security
- Multiple Administrators Support
- Enabling Enhanced Audit Logging Support
- Configuring the Wireless LAN Controller
- Enabling SonicOS API and Configuring Authentication Methods
- Enabling GMS Management
- Configuring the Management Interface
- Client Certificate Verification
- Selecting a Language
- Configuring Time Settings
- Managing Certificates
- Administering SNMP
- Firmware Settings
- Storage
- Restarting the System
- SonicWall Support
Configuring Basic Functionality
To enable SNMP
- Navigate to Device | Settings > SNMP.
-
Select Enable SNMP. By default, SNMP is disabled.
- Click Accept. The SNMP information is populated on the SNMP page, and Configure becomes available.
-
To configure the SNMP interface, click Configure. The Configure SNMP View dialog is displayed.
- On the General page, enter the host name of the SonicWall security appliance in the System Name field.
- Optionally, enter the network administrator’s name in the System Contact field.
- Optionally, enter an email address, telephone number, or pager number in the System Location field.
- If the SNMPv3 configuration option is used, enter an asset number in the Asset Number field. Otherwise, this field is optional.
- Enter a name for a group or community of administrators who can view SNMP data in the Get Community Name field.
- Optionally, enter a name for a group or community of administrators who can view SNMP traps in the Trap Community Name field.
- Enter the IP address(es) or host name(s) of the SNMP management system receiving SNMP traps in the Host 1 through Host n fields. You must configure at least one IP address or host name, but up to the maximum number of addresses or host names for your system can be used.
- If you:
- Want to set up SNMPV3, go to Configuring SNMPv3 Engine IDs .
- Finished setting up SNMP for now, click Add.
Was This Article Helpful?
Help us to improve our support portal