SonicOS 7.1 Device Settings
- SonicOS 7.1
- About SonicOS
- About Device Settings
- Managing SonicWall Licenses
- System Administration
- Configuring the Firewall Name
- Enabling Wireless LAN and IPv6
- Changing the Administrator Name and Password
- Configuring Login Security
- Multiple Administrators Support
- Enabling Enhanced Audit Logging Support
- Configuring the Wireless LAN Controller
- Enabling SonicOS API and Configuring Authentication Methods
- Enabling GMS Management
- Configuring the Management Interface
- Client Certificate Verification
- Selecting a Language
- Configuring Time Settings
- Managing Certificates
- Administering SNMP
- Firmware Settings
- Storage
- Restarting the System
- SonicWall Support
Switching Configuration Modes
Each appliance includes a Mode option that toggles the configuration mode of the Management Interface. If you are in Configuration Mode, you can switch to Non-Config Mode at any time, or if you are in Non-Config Mode. you can switch to Configuration Mode.
This method is in addition to switching modes from the Mode setting on each view. For more information about modes, see the SonicOS 7.1 About SonicOS documentation.
To switch modes
- Navigate to Device | Settings > Administration.
- Click Management.
-
In the WEB MANAGEMENT SETTINGS section, If you are in:
-
Configuration Mode, click End Config Mode, and click OK.
The Mode indicator in the top right of the page displays Non-Config.
-
Non-Config Mode, click Configuration Mode.
The Mode indicator in the top right of the page displays Configuration.
-
Was This Article Helpful?
Help us to improve our support portal