SonicOS 7.1 Access Points
- SonicOS 7.1 Access Points
- About SonicOS
- About Access Points
- Settings
- Synchronize Access Points
- Provisioning Overview
- Creating/Modifying Provisioning Profiles
- Adding/Editing a Provisioning Profile - Getting Started
- General Settings for Provisioning Profiles
- 5GHz/2.4GHz Radio Basic Settings for Provisioning Profiles
- 5GHz/2.4GHz Radio Advanced Settings for Provisioning Profiles
- Sensor Settings for WIDP in Provisioning Profiles
- Mesh Network Settings for Provisioning Profiles
- 3G/4G/LTE WWAN Settings for Provisioning Profiles
- Bluetooth LE Settings for Provisioning Profiles
- Deleting Access Point Profiles
- Product Specific Configuration Notes
- Managing Access Point Objects
- Firmware Management
- Floor Plan View
- Station Status
- Intrusion Detection Services
- Advanced IDP
- Packet Capture
- Virtual Access Points
- RF Monitoring
- RF Analysis
- RF Spectrum
- FairNet
- Wi-Fi Multimedia
- 3G/4G/LTE WWAN
- Bluetooth LE Devices
- Radio Management
- SonicWall Support
Synchronize Access Points
Click Synchronize Access Points at the top of the DEVICE | Access Points > Settings | Access Point Objects page to issue a query from the SonicWall appliance to the WLAN Zone. All connected access points report their current settings and statistics to the appliance. SonicOS also attempts to locate the presence of any newly connected access points that are not yet registered with the firewall.
The button polls the access points, but does not push configuration to them.
Was This Article Helpful?
Help us to improve our support portal