SonicOS 7.1 Access Points

Download PDF
Technical Documentation > SonicOS 7.1 Access Points > Radio Management > Configuring Radio Management

Configuring Radio Management

Radio Resource Management settings are available on the DEVICE | Access Points > Radio Management page.

Radio Resource Management General Settings
Option Name Description
Enable Radio Resource Management - RRM Enable this option to activate the settings for Station Quality Threshold and Radio Quality Threshold. This option is disabled by default.
Station Quality Threshold (1-50)

Health index to track and assess the status of wireless client connections, from 1 to 50. A higher index value means the wireless station is connected with a higher data rate and less packet drop.

Wireless clients are disconnected when the station quality drops below the configured threshold.

  • Minimum value = 1
  • Maximum value = 50
  • Default value = 20
Radio Quality Threshold (1-50)

Health index to track and assess the status of radio band utilization, which varies between 1 and 50. A higher index value means radio band utilization is lower with less packet drop.

The radio transmit power is lowered when the radio quality drops below the configured threshold.

  • Minimum value = 1
  • Maximum value = 50
  • Default value = 20

To configure Radio Resource Management settings

  1. Navigate to the DEVICE | Access Points > Radio Resource Management page.
  2. Select the Enable Radio Resource Management - RRM option to enable this feature.

  3. For Station Quality Threshold (1-50), enter a value between 1 and 50 or accept the default setting of 20.

    A higher index value means the wireless station is connected with higher data rate and less packet drop. Wireless clients are disconnected when the station quality drops below the configured threshold.

  4. For Radio Quality Threshold (1-50), enter a value between 1 and 50 or accept the default setting of 20.

    A higher index value means radio band utilization is lower with less packet drop. The radio transmit power is lowered when the radio quality drops below the configured threshold.

  5. Click Accept.

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden