SonicOS 7.1 Access Points

Uploading Firmware to an Access Point

You can upload any locally saved firmware image file to an access point. The saved file can be an official SonicWall firmware version, or a firmware image downloaded from a manually specified URL.

To upload a firmware image to an access point

  1. Do one of the following to obtain the firmware image and save it on your local workstation:

  2. If you want to upload a firmware image, click Upload Firmware under Action in the row for the desired access point type to open the Upload Firmware dialog box. If you downloaded the image file using the link to software.SonicWall.com, the dialog is already open.
  3. In the Upload Firmware dialog, click Browse, navigate to the saved image and select it. The Upload Firmware dialog now displays the firmware image name.

  4. In the Upload Firmware dialog, click Upload.

    The firmware image is uploaded to the buffer on your security appliance. While uploading, the Status indicates the percentage of the upload.

    When the upload completes, the Version column displays the new firmware version. If the access point is connected, the firmware version is automatically pushed to it and the Status changes to a check mark, indicating that the firmware image is Ready, and the Build Date shows the date that the image was created. The access point is now running the new firmware.

  5. To clear the downloaded firmware from the buffer, click Reset Firmware. The Status indicator and Build Date return to the default display.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden