• SonicOS 7.1 Access Points
• About SonicOS
  • About SonicOS
  • SonicOS Workflow
  • How to Use the SonicOS Administration Guides
  • Guide Conventions
• About Access Points
• Settings
  • Synchronize Access Points
  • Provisioning Overview
  • Creating/Modifying Provisioning Profiles
    • Adding/Editing a Provisioning Profile - Getting Started
    • General Settings for Provisioning Profiles
    • 5GHz/2.4GHz Radio Basic Settings for Provisioning Profiles
      • Radio Settings
      • Wireless Security
      • Protected Management Frames (PMF Option)
      • About Local Radius Servers and EAP Authentication Balancing
      • Configuring Radius Server Settings
      • ACL Enforcement
      • Remote MAC Address Access Control Settings
    • 5GHz/2.4GHz Radio Advanced Settings for Provisioning Profiles
      • Configuring the RSSI Threshold
      • Configuring IEEE802.11r Settings for Secure Fast Roaming
      • Configuring IEEE802.11k Settings for Dynamic Radio Management
      • Configuring IEEE802.11v Settings for Dynamic Environment Management
    • Sensor Settings for WIDP in Provisioning Profiles
    • Mesh Network Settings for Provisioning Profiles
      • Setting Up a Mesh Network
      • Enabling a Multi-hop Mesh Network
      • Active/Active Clustering Full Mesh
    • 3G/4G/LTE WWAN Settings for Provisioning Profiles
      • Manually Configuring the 3G/4G/LTE WWAN Profile
      • Configuring Load Balancing among Multiple USB Modems
    • Bluetooth LE Settings for Provisioning Profiles
    • Deleting Access Point Profiles
    • Product Specific Configuration Notes
  • Managing Access Point Objects
    • Deleting Access Point Objects
    • Rebooting Access Point Objects
    • Modifying Access Point Objects
• Firmware Management
  • About Firmware Management
  • Obtaining the Latest SonicWall Firmware
  • Downloading Firmware from a Specific URL
  • Uploading Firmware to an Access Point
• Floor Plan View
  • Managing the Floor Plans
    • Selecting a Floor Plan
    • Creating a Floor Plan
    • Editing a Floor Plan
  • Managing Access Points
    • Available Devices
    • Added Access Points
    • Removing Access Points
    • Export Image
    • Context Menu
• Station Status
• Intrusion Detection Services
  • Scanning Access Points
  • Authorizing Access Points
• Advanced IDP
  • Enabling Wireless IDP on a Profile
  • Configuring Wireless IDP Settings
  • Viewing KRACK Sniffer Packets
• Packet Capture
• Virtual Access Points
  • Before Configuring VAPs
    • Determining Your VAP Needs
    • Determining Security Configurations
    • Sample Network Definitions
    • Prerequisites
    • VAP Configuration Worksheet
  • Access Point VAP Configuration Task List
  • Virtual Access Point Groups
  • Virtual Access Point Objects
    • General Tab
    • Advanced Tab
  • Virtual Access Point Profiles
    • Virtual Access Point Schedule Settings
    • Virtual Access Point Profile Settings
    • Remote MAC Address Access Control Settings
    • ACL Enforcement
    • IEEE802.11R Settings
    • IEEE802.11K Settings
    • IEEE802.11V Settings
    • Agile Multiband Settings
• RF Monitoring
  • Prerequisites
  • RF Monitoring Summary
  • 802.11 General Frame Setting
  • 802.11 Management Frame Setting
  • 802.11 Data Frame Setting
  • Discovered RF Threat Stations
  • Adding a Threat Station to the Watch List
  • Practical RF Monitoring Field Applications
    • Using Sensor ID to Determine RF Threat Location
    • Using RSSI to Determine RF Threat Proximity
• RF Analysis
  • Using RF Analysis on SonicWall Access Points
    • Understanding the RF Score
    • Channel Utilization Graphs and Information
    • Viewing Overloaded Channels
    • RFA Highly Interfered Channels
• RF Spectrum
• FairNet
  • Supported Platforms
  • FairNet Features
  • Management Interface Overview
  • Configuring FairNet
• Wi-Fi Multimedia
  • WMM Access Categories
  • Assigning Traffic to Access Categories
  • Configuring Wi-Fi Multimedia Parameters
    • Configuring WMM
    • Creating a WMM Profile for an Access Point
• 3G/4G/LTE WWAN
• Bluetooth LE Devices
  • Viewing BLE Scanned Data
• Radio Management
  • Configuring Radio Management
  • Configuring Dynamic Channel Selection Settings
• SonicWall Support
  • About This Document

General Settings for Provisioning Profiles

To configure the options on the General screen

1. Set the SonicWave General Settings.

   Option	Action
   Enable	When selected, enables the SonicWave access point. By default, this option is enabled.
   Retain Settings	When selected, retains the customized until the next time the unit is rebooted. Edit option is enabled and the Retain Settings dialog is displayed. You can customize which settings needs to be retained.
   Enable RF Monitoring	When selected, enables wireless RF-threat, real-time monitoring and management.
   Enable LED	When selected, turns on the SonicWave LEDs. If left unchecked, which is the default, the LEDs stay off.
   Enable Low Power Mode	When selected, allows the SonicWave to operate in a low power mode because of the power source not being standard 802.3at PoE.
   PoE Out	When selected, the Power over Ethernet ports operate in strict order: resistance checks are disabled on the port, continually checks that overload limit is not reached or a short circuit detected.
   Name Prefix	Type the prefix used for the name in the field provided.
   Country Code	From the drop-down menu, select the country code for the country in which the access point is deployed.
   EAPOL Version	Select EAPoL version from the drop-down menu. Note that V2 provides the better security.
   Band Steering Mode	Select the band steering mode from the drop-down menu. Options include: Disable, Auto, Prefer 5GHz, or Force 5GHz.
   Proxy Client DNS Request	When selected, a DNS proxy forwards DNS requests and replies between DNS clients and a DNS server.

2. Set the Virtual Access Point Settings:

   1. For 5GHz Radio Virtual AP Group, select a Virtual Access Point object group from the drop-down menu.
   2. For 2.4GHz Radio Virtual AP Group, select a Virtual Access Point object group from the drop-down menu.

3. Scroll down to see the other General Settings.

   

4. Set the Dynamic VLAN ID Assignment.

   To enable the options under Dynamic VLAN ID Assignment, you need create a WLAN zone under OBJECT | Match Objects > Zones and add a VLAN interface on the NETWORK | System > Interfaces page. Click + Add Interface and choose the Virtual Interface option. The Add Virtual Interface page appears.

5. Configure the L3 SSLVPN Tunnel Settings:

   1. Type in the SSLVPN Server name or IP address in the field provided.
   2. Type the User Name for the SSLVPN server in the field provided.
   3. Type the Password to authenticate on the SSLVPN server.
   4. Type the Domain name in the field provided.
   5. Select the Auto-reconnect option to enable it.
   6. If you want to configure Layer 3 SSLVPN, click NETWORK | SSL VPN > Client Settings and on the SonicPoint / SonicWave L3 Management Default Device Profile tab, define the appropriate settings using the Edit Device Profile dialog.

6. Set the Administrator Settings:

   1. Type in the user Name of the network administrator.
   2. Type in the Password for the network administrator.