SonicOS 7 Getting Started Guide for NSsp 10700, 11700, 13700 and NSa Series
Default Settings
The following table lists the default values, or identifies where you can find them, for certain key settings.
| Port or Setting | IP Address / Login / Password |
|---|---|
| Serial number | On the nameplate or in the initial firmware |
| Authentication code | Available in the user interface on the Dashboard with the system information. |
| Registration code | From MySonicWall |
| Maintenance key | From MySonicWall |
| Console |
|
| X0 | 192.168.168.168
|
| X1 | Not set by default |
| Management | 192.168.1.254
|
| SafeMode |
SafeMode is accessed through the MGMT port which is by default Ensure to use the new password if you have updated the default password. For detailed information about accessing SafeMode, refer to the SonicOS 7 Upgrade Guide. |
| MySonicWall | Register on https://mysonicwall.com to set up an account |
Was This Article Helpful?
Help us to improve our support portal