• SonicOS 7
• Introduction
• NSa Series Overview
  • Deployment Options
    • Internet Edge Deployment
    • Medium and Distributed Enterprises
  • NSa Hardware Features
  • NSa System Requirements
• NSsp 10700, 11700, and 13700 Overview
  • Features
    • Connectivity, Port Density and Performance
    • Firmware Features
  • Hardware Features
    • +
    • Rear Panel
    • System Specifications
• Determining the WAN Type
• System Setup
  • Default Settings
  • System Startup
  • Basic Configuration
  • Registration and Licensing
  • Creating a MySonicWall Account
• Setup Options
  • Zero Touch
  • Setting Up with NSM
  • Setting Up with SonicExpress
  • Setting Up with CLI
• Running the Setup Wizard
• Testing and Troubleshooting Connectivity
• Migration Tool
  • About Migration
  • Using the Migration Tool
• SonicWall Support
  • About This Document

Running the Setup Wizard

After you have setup the firewall and can access the user interface, you can use the Setup Wizard to finalize the key settings.

1. Navigate to https://192.168.168.168 in your browser.

   You computer should be using DHCP IP addressing.

2. Click the link to launch the SonicWall Setup Guide.

   

3. When the SonicOS Setup Guide opens, click NEXT and follow the prompts in the Setup Guide.

   

4. On the Credentials screen, enter a new administrator password and click NEXT.

   The default administrator credentials are Username: admin Password: password.

   Ensure to use the new password if you have updated the default password.

5. Validate the DHCP IP servers displayed on the IP Configuration screen and click NEXT.

   

6. On the Setup Complete screen, review the settings and click DONE. The SonicOS login screen displays.