• SonicOS 7
• Introduction
• NSa Series Overview
  • Deployment Options
    • Internet Edge Deployment
    • Medium and Distributed Enterprises
  • NSa Hardware Features
  • NSa System Requirements
• NSsp 10700, 11700, and 13700 Overview
  • Features
    • Connectivity, Port Density and Performance
    • Firmware Features
  • Hardware Features
    • +
    • Rear Panel
    • System Specifications
• Determining the WAN Type
• System Setup
  • Default Settings
  • System Startup
  • Basic Configuration
  • Registration and Licensing
  • Creating a MySonicWall Account
• Setup Options
  • Zero Touch
  • Setting Up with NSM
  • Setting Up with SonicExpress
  • Setting Up with CLI
• Running the Setup Wizard
• Testing and Troubleshooting Connectivity
• Migration Tool
  • About Migration
  • Using the Migration Tool
• SonicWall Support
  • About This Document

Zero Touch

Your SonicWall appliance is automatically enabled for the Zero-Touch feature. Zero-Touch makes it easy to register your unit and add it to Capture Security Center for management and reporting in three simple steps.

1. Be sure your firewall is registered on MySonicWall.
2. Enable Zero Touch.
3. Connect the firewall to power and turn it on.

For the details about using Zero Touch, refer to the Zero-Touch Deployment Guide on the Technical Documentation portal.