• SonicOS7.0
• About Access Points
• Settings
  • Synchronize Access Points
  • Provisioning Overview
  • Creating/Modifying Provisioning Profiles
    • Adding/Editing a Provisioning Profile - Getting Started
    • General Settings for Provisioning Profiles
    • 5GHz/2.4GHz Radio Basic Settings for Provisioning Profiles
      • Radio Settings
      • Wireless Security
      • Protected Management Frames (PMF Option)
      • About Local Radius Servers and EAP Authentication Balancing
      • Configuring Radius Server Settings
      • ACL Enforcement
      • Remote MAC Address Access Control Settings
    • 5GHz/2.4GHz Radio Advanced Settings for Provisioning Profiles
      • Configuring the RSSI Threshold
      • Configuring IEEE802.11r Settings for Secure Fast Roaming
      • Configuring IEEE802.11k Settings for Dynamic Radio Management
      • Configuring IEEE802.11v Settings for Dynamic Environment Management
    • Sensor Settings for WIDP in Provisioning Profiles
    • Mesh Network Settings for Provisioning Profiles
      • Setting Up a Mesh Network
      • Enabling a Multi-hop Mesh Network
      • Active/Active Clustering Full Mesh
    • 3G/4G/LTE WWAN Settings for Provisioning Profiles
      • Manually Configuring the 3G/4G/LTE WWAN Profile
      • Configuring Load Balancing among Multiple USB Modems
    • Bluetooth LE Settings for Provisioning Profiles
    • Deleting Access Point Profiles
    • Product Specific Configuration Notes
  • Managing Access Point Objects
    • Deleting Access Point Objects
    • Rebooting Access Point Objects
    • Modifying Access Point Objects
• Firmware Management
  • About Firmware Management
  • Obtaining the Latest SonicWall Firmware
  • Downloading Firmware from a Specific URL
  • Uploading Firmware to an Access Point
• Floor Plan View
  • Managing the Floor Plans
    • Selecting a Floor Plan
    • Creating a Floor Plan
    • Editing a Floor Plan
  • Managing Access Points
    • Available Devices
    • Added Access Points
    • Removing Access Points
    • Export Image
    • Context Menu
• Station Status
• Intrusion Detection Services
  • Scanning Access Points
  • Authorizing Access Points
• Advanced IDP
  • Enabling Wireless IDP on a Profile
  • Configuring Wireless IDP Settings
  • Viewing KRACK Sniffer Packets
• Packet Capture
• Virtual Access Points
  • Before Configuring VAPs
    • Determining Your VAP Needs
    • Determining Security Configurations
    • Sample Network Definitions
    • Prerequisites
    • VAP Configuration Worksheet
  • Access Point VAP Configuration Task List
  • Virtual Access Point Groups
  • Virtual Access Point Objects
    • General Tab
    • Advanced Tab
  • Virtual Access Point Profiles
    • Virtual Access Point Schedule Settings
    • Virtual Access Point Profile Settings
    • Remote MAC Address Access Control Settings
    • ACL Enforcement
    • IEEE802.11R Settings
    • IEEE802.11K Settings
    • IEEE802.11V Settings
    • Agile Multiband Settings
• RF Monitoring
  • Prerequisites
  • RF Monitoring Summary
  • 802.11 General Frame Setting
  • 802.11 Management Frame Setting
  • 802.11 Data Frame Setting
  • Discovered RF Threat Stations
  • Adding a Threat Station to the Watch List
  • Practical RF Monitoring Field Applications
    • Using Sensor ID to Determine RF Threat Location
    • Using RSSI to Determine RF Threat Proximity
• RF Analysis
  • Using RF Analysis on SonicWall Access Points
    • Understanding the RF Score
    • Channel Utilization Graphs and Information
    • Viewing Overloaded Channels
    • RFA Highly Interfered Channels
• RF Spectrum
• FairNet
  • Supported Platforms
  • FairNet Features
  • Management Interface Overview
  • Configuring FairNet
• Wi-Fi Multimedia
  • WMM Access Categories
  • Assigning Traffic to Access Categories
  • Configuring Wi-Fi Multimedia Parameters
    • Configuring WMM
    • Creating a WMM Profile for an Access Point
• 3G/4G/LTE WWAN
• Bluetooth LE Devices
  • Viewing BLE Scanned Data
• Radio Management
  • Configuring Radio Management
  • Configuring Dynamic Channel Selection Settings
• SonicWall Support
  • About This Document

Creating/Modifying Provisioning Profiles

On the DEVICE | Access Points > Settings page, you can configure and manage the provisioning profiles as well as the individual objects. You can add any number of profiles.

SonicPoint AC refers to SonicPoint ACe/ACi/N2; SonicPoint refers to all SonicPoint devices. SonicWave refers to SonicWave 432e/432i/432o/224w/231c/231o.

Navigate to DEVICE | Access Points > Settings > Access Point Provisioning Profiles page. The five default SonicOS profiles are listed along with any custom profiles you have developed under the SonicPoint/SonicWave Provisioning Profiles section. To modify any of the default provisioning profiles, hover on the profile and click the Edit icon, and make the appropriate changes.

Because creating or modifying the SonicPoint SonicWave Provisioning Profiles are very similar across all access point types, this section reviews how to add a new profile for a SonicWave device. Significant differences in the general process are noted and described in more detail later in this section.

The SonicWall-provided provisioning profiles cannot be deleted so the corresponding Delete icon is grayed out and not active.

The Add New Profile option has several screens where similar settings are grouped. The procedures are grouped to match those screens.

• Adding/Editing a Provisioning Profile - Getting Started
• General Settings for Provisioning Profiles
• 5GHz/2.4GHz Radio Basic Settings for Provisioning Profiles
• 5GHz/2.4GHz Radio Advanced Settings for Provisioning Profiles
• Sensor Settings for WIDP in Provisioning Profiles
• Mesh Network Settings for Provisioning Profiles
• Bluetooth LE Settings for Provisioning Profiles
• Deleting Access Point Profiles
• Product Specific Configuration Notes