Secure Mobile Access 100 10.2 User Guide

Using Virtual Office Authentication > Using Two-Factor Authentication > VASCO Two-Factor User Authentication Process > Logging into Virtual Office Using VASCO Two-Factor Authentication
Table of Contents

Logging into Virtual Office Using VASCO Two-Factor Authentication

To log in to the Secure Mobile Access Virtual Office using VASCO two-factor authentication

  1. Enter the IP address of the SMA appliance in your browser and press Enter.

  2. Select the appropriate domain from the Domain drop-down menu and click NEXT.

  3. Type in your user name in the UserID field.

  4. Enter the passcode in the Password field. Your entry in the password field depends on whether your system requires a PIN:

    • If you already have a PIN, enter the passcode in the Password field. The passcode is the user PIN and the VASCO Digipass token code. For example, if the user’s PIN is 8675 and the token code is 30966673, then the passcode is 867530966673.
    • If a PIN is required, but you do not yet have a PIN, enter the VASCO Digipass code in the Password field. You are prompted to create a PIN.
    • If the VASCO server does not require a PIN, simply enter the VASCO Digipass code.

    Consult with your network Administrator to determine if your configuration requires a PIN.

  5. Click LOGIN.